PVC80 anti-corrosion and flame-retardant mining cable hook

Description :

　　Mining cable hookGL-PVC28 Sales of hanging cable hooks

　　GL-PVC28Cable hooks,PVCCable hooks, hanging cable hooks, sales of mining cable hooks, wholesale of mining cable hooks

　　Tai'an Yucheng Mining Equipment Co., Ltd. specializes in mining coal drill accessories, cable clamps for coal mining machines, cable clamps, mining cable hooks and other mining products. The products are diverse and complete in specifications. Below is an introduction to GL-PVC28 mining cable hooks.

　　1、 Application scope of GL-PVC28 mining cable hook:

　　Hanging cable hooks used underground in coal mines can replace traditional steel made cable hooks and corresponding supports, and are suitable for cable installation in mines, ground and underground passages, especially for cable installation underground in coal mines. It can be flexibly used according to the required number of cables, achieving time-saving, labor-saving, and effortless installation, removal, addition, and replacement of cables. It is currently an ideal accessory for cable installation in mines.

　　2、 GL-PVC28 Mining Cable Hook Parameter Diagram:

　　3、 Installation instructions for GL-PVC28 mining cable hook:

　　1. Choose suitable cable hooks according to the cable model and outer diameter, with a hanging position of 1.2m to 1.8m (or limited to the cable not hanging down). Each unit should hang one or more cable hooks.

　　2. When hanging, first drill holes in specialized bolts or other suspension components to fix the hook on the wellbore wall. When fixing the hook, the curved hook should be vertically hanging down. If multiple cables are suspended, a set of hooks should be used to hang them in series with each other. The construction personnel first connect the hooks in pairs on the ground and then fix them according to the previous method.

　　When two hooks are connected in series, first align the hanging hole of one hook with the hanging rod of the other hook. The straight sections of the two hooks are at a right angle, press them in firmly to fully insert the hanging rod into the hanging hole, and then hold the arc-shaped hook and rotate it to make the straight sections of the two hooks 180 ℃. The safety buckle of one hook is just embedded in the recess of another hook.

　　4. The construction personnel can only release the cable after confirming that it has entered the arc-shaped hook as a whole.

　　Mining cable hooks are also called hanging cable hooks. It can be flexibly used according to the root of the installed cable, achieving time-saving, labor-saving, and effortless installation, removal, addition, and replacement of cables. It is currently an ideal accessory for cable installation in mines. Yucheng cable hooks have good quality, large quantity and competitive price.

AfterSalesService :

• GLPVC28 cable hook