KCS-150D wet dust removal fan for mining to purify air

Description :

　　KCS-150D wet dust removal fan for mining to purify air

　　KCS-150DPurification function of wet dust removal fan, KCS-150D wet dust removal fan, explosion-proof wet dust removal fan, good performance of dust removal fan

　　According to relevant departments' statistics, there have been nearly 700000 cases of pneumoconiosis and over 200000 deaths in mining enterprises in China, ranking first among all types of occupational diseases When coal powder accumulates to (43mg/m33), it may cause problems underground in coal mines. Therefore, the control of coal mine dust is the key to coal mine safety! Tai'an Yucheng is a manufacturer specializing in wet dust removal fans. Below, we will introduce our KCS-150D wet dust removal fan:

　　1、 KCS-150D wet dust removal fan model:

　　2、 Working principle of KCS-150D wet dust removal fan:

　　The KCS-150D wet dedusting fan fully mixes the dust gas with the humidified spray water. The dust particles of various sizes form large particles of mud after moisture absorption and high-speed collision, and enter the cyclone density separation device at the set tangential speed; The KCS-150D wet dust removal fan is used in the cyclone density separation device. The high-speed rotating three-phase mixture of gas, water, and mud is stratified according to particle size and density in the centrifugal force field. The water droplets of mud and large particles are accelerated and adsorbed onto the cylinder wall before being discharged. The clean air with small water droplets is then separated into water and gas before being discharged, thus achieving air purification effect.

　　3、 KCS-150D wet dust removal fan structure diagram:

　　1. Pull out axial explosion-proof local ventilation fan 2, frame 3, dust collector

　　KCS-150D wet dust removal fan is suitable for comprehensive excavation working face, and on-site purification of dust containing air during excavation operation; It can also be used in coal and rock tunnel excavation, anchor spraying working face drilling, and blasting workplaces. After the dust laden air is blown by a local fan, it is purified by a wet vibrating wire dust collector.

　　Yucheng Warm Reminder: The installation and use of this product must comply with the relevant provisions of the "Coal Mine Safety Regulations". Less dust, more peace of mind, KCS produced and sold by our factoryMining wet dust removal fanThere are various types and models available, including KCS-120D dust removal fan, KCS-230D dust removal fan, KCS-410D dust removal fan, and more. There is always one that suits you, and we look forward to working with you! (The above is not the actual price)

AfterSalesService :

• KC-150D wet dust removal fan