KCS-220LL centrifugal screw string dust removal fan purification expert
KCS-220LL centrifugal screw string dust removal fan purification expert

KCS-220LL centrifugal screw string dust removal fan purification expert

Category:

mechanical equipment/Fans, exhaust equipment/Dust removal fan

Model:

KCS-220LL

Brand:

Tai'an Yucheng

Retail Price

13,000.00USD


重量

kg

  • Product Description
  • Description :

      KCS-220LLCentrifugal screw string dust removal fan purification expert

      KCS-220LLCentrifugal spiral string dust removal fan, KCS-220LL dust removal fan, KCS dust removal fan

      Wet dust removal fan manufacturer

      1、 Technical performance parameters of KCS-220LL centrifugal screw string dust removal fan:

      1. Rated processing air volume: 225m3/min

      2. Total dust removal efficiency: ≥ 90%

      3. Respiratory dust removal efficiency: (90-98)% (positively correlated with filtration wind speed)

      4. Design work resistance: ≤ 1200Pa

      5. Liquid to gas ratio: (0.03-0.09) L/m3 (processing air volume) (depending on the dust concentration in the air)

      6. Spray water supply pressure: ≥ 0.3MPa

      7. Work noise: ≤ 85dB (A)

      8. Applicable ambient temperature:>0 ℃

      9. Applicable dust concentration range: (0-24000) mg/m3 (processing air volume)

      10. Applicable dust types: coal dust, rock dust, cement dust, iron ore dust, aluminum oxide and other hydrophilic dust

      11. Explosion proof motor voltage: three-phase AC, frequency 50Hz, 380V/660V, 660V/1140V

      2、 The structural composition of KCS-220LL centrifugal screw string dust removal fan:

      The KCS-220LL centrifugal screw string dust removal fan mainly consists of four parts: mixing chamber, purification chamber, fan, and dehydration device.

      3、 KCS-220LL centrifugal screw string dust removal fan can be installed with a voltage power supply of 660/1140V:

      Motor wiring method: The power supply voltage is 660V, and the △ connection method is selected; When the power supply voltage is 1140V, use the Y connection method. Explosion proof type of motor used: explosion-proof type; Explosion proof mark: When the ExdI fan leaves the factory, the motor is wired according to △, and the wiring diagram is as follows:

      The KCS-220LL centrifugal screw string dust removal fan is mainly used for on-site purification of dusty air in coal mine operation points where dust is relatively concentrated underground, and can partially eliminate toxic and harmful components in the gas. It is a true purification expert.

    AfterSalesService :

    Key words:
    • KCS220LL dust removal fan