600mm-30kg pneumatic double track brake, pneumatic brake supports inspection

Description :

　　600mm-30kgPneumatic dual track obstruction supports inspection

　　ZBQSeries 600 gauge double track derailleur, 600 gauge double track derailleur, ZBQ double track derailleur, double track derailleur manufacturer, double track derailleur supports inspection

　　1、 600 gauge 30kg double track car stopper pneumatic car stopper: This product is a utility model pneumatic car stopper related to the technical field of underground transportation machinery in coal mines. It changes the dynamic action of the mining car from static to prevent unnecessary accidents caused by the sliding of the mining car. The pneumatic derailleur consists of two parallel fixed supports, an derailleur rod, a front support seat, a rear support seat, and a foot pedal linkage device. The two ends of the fixed support of the monorail derailleur are respectively fixed on the front support seat and the rear support seat. The derailleur rod is placed between the two fixed supports, and the rotating shaft connected between the two fixed supports passes through the middle of the derailleur rod. The derailleur rod is in a heavy shape with a small upper end and a thick lower end. In its natural state, its upper end is raised. The foot pedal linkage device consists of a foot pedal, a pull wire, and a shift rod. The middle of the shift rod is hinged between the two fixed support seats, and its upper end is connected to the foot pedal through a pull wire.

　　2、 600 gauge 30kg double track brake with specific parameters:

　　Product model: 600 gauge 30kg double track car stopper

　　Basic parameters of 30kg pneumatic brake caliper:

　　Scope of application; Change the direction of the mine car at the switch of the mine car

　　Buffer travel; 32mm

　　Pneumatic type; Piston cylinder

　　Piston rod diameter; 25mm

　　External dimensions; 1100*1500*500mm

　　Cylinder diameter; 80mm

　　weight 48kg

　　Gas consumption; 380L/S

　　Load; 2000N

　　Pump power; 1500w

　　Force distance; 20Nm

　　No load speed; 5000r/min

　　service life; Greater than 300km

　　Type; pneumatic pump

　　Piston stroke; 250mm

　　Applicable rail type; 30kg

　　Working medium; Compressed air that has been filtered

　　Adapt to working temperatures of 5-60 degrees Celsius

　　3、 Working principle of the 600 gauge 30kg double track brake:

　　The 600 gauge double track car stopper is designed on the outer side of the track, and its working principle is to pull the control valve of the pneumatic control box. The cylinder pushes the car stopper to open. When the mining car passes through, the control valve of the pneumatic control box is pulled in the opposite direction, and the cylinder pushes the car stopper to close, thus achieving the blocking and stopping of the mining car.

　　Tai'an Yucheng Mining Equipment Co., Ltd. produces industrial and mining railway equipment: fishtail bolts, foundation bolts, track clamps (fishplates), buckles, pads, gauge rods, spring bars, square road nails, wooden threaded road nails, spiral road nails, track protection nails, turnouts/gauge baffles, insulated gauge rods, anti climbing devices, mining car wheels, sky wheels, U-shaped steel clamps, hydraulic track lifts, rack and pinion track lifts, hydraulic bending machines, hydraulic vertical bending machines, screw bending machines, switchmen, hand drills, pry bars, gauge gauges and other industrial and mining railway accessories.

AfterSalesService :

• 30kg pneumatic double track brake