18kg, 22kg, 30kg track clamp plate made of Q235 material

Description :

　　18kg22kg30kgRoad clamp plate made of Q235 material

　　18kgTrack clamp, 18kg 22kg 30kg track clamp, Q235 material for track connection plate,Fish plate,Road clamp manufacturer,Fishtail board can be customized

　　The industrial and mining railway equipment produced by Tai'an Yucheng Mining Equipment Co., Ltd. includes fish tail bolts, foundation bolts, track clamps (fish tail plates), buckle plates, pads, gauge rods, spring bars, square track nails, wooden threaded track nails, spiral track nails, track protection nails, turnouts, gauge baffles, iron pads, iron seats, rubber pads, square inclined pads, insulated gauge rods, anti climbing devices, mining car wheels, sky wheels, U-shaped steel clamps, hydraulic track lifters, rack and pinion track lifters, and hydraulic bending machines.

　　When your demand is high, you can choose truck transportation and we support home delivery.

　　18kg22kg30kgRoad clamp can also be called18kg22kg30kgRail fishplates or18kg22kg30kgTrack insulation clamp is a type of connecting fastener used for connecting rails between rails.

　　18kg22kg30kgThe rail clamp connects and clamps two steel rails to resist joint shear and prevent rail head misalignment. The structure of the rail joint itself is weak, and there is a lot of impact force when the train passes through the joint. Therefore, it is required that the upper and lower parts of the fishplate must be tightly attached to the rail and have sufficient strength. Therefore, steel with good rigidity and toughness must be used for manufacturing. If necessary, heat treatment should be carried out to increase the allowable stress of the fishplate, improve the hardness and wear resistance of its supporting surface. Both sides of the fishplate have slopes, which are consistent with the slopes of the rail bottom and rail head. When the fishplate bolts are tightened, they cannot come into contact with the rail waist. In this way, if the fishplate is slightly worn, the bolts can be tightened again to maintain the firmness of the joint connection.

　　18kg22kg30kgInstallation steps of road clamp:

　　1. Install two bolts on each joint of the track clamp, that is, one bolt on each rail head first.

　　2. When installing bolts, the spring and flat washers should be installed first, with the opening facing downwards.

　　Yucheng Mining Equipment Company has advanced production equipment, including large electrolytic furnaces, bolt stamping machines, wire rolling machines, cutting machines, steel rolling units, cable punching machines, cutting machines, milling and planing machines, forging and pressing machines, and can produce various national standard railway accessories. Our factory has high-tech physical and chemical inspection equipment, temperature control equipment, to ensure that every product meets the national quality inspection requirements. We will provide you with detailed product prices, product images, product models, and other product introduction information. Looking forward to working with you.

AfterSalesService :

• 18kg track clamp