DK624-2-4 mining single turnout DK630-4-12 single turnout direct sales

Description :

　　DK624-2-4Mining single switch DK630-4-12 single switch direct sales

　　DK624-2-4Mining single switch, DK630-4-12 right switch, DK630-4-12 single switch, 600 gauge single switch

　　With the rapid development of the transportation industry, trains, high-speed trains and other modes of transportation have brought convenience to people's lives. In fact, there are also many knowledge secrets in these railway trunk lines. Have you observed the train tracks? How much do you know about single switch switches? Tai'an Yucheng is a well-known manufacturer that operates in the mining rail transit industry all year round. The product quality is reliable and the integrated service is in place. Next, let Yucheng take you to learn more about the Yucheng brand DK624-2-4 mining single switch.

　　1、 Product Introduction:

　　DK624-2-4 mining single switch is a switch part that branches from the main track to the auxiliary track, divided into two types: left switch and right switch. A turnout is a line connecting device that allows locomotives and vehicles to switch from one track to another, usually installed in large quantities at stations and marshalling yards. With turnouts, the passing capacity of the line can be fully utilized. Even for single track railways, laying turnouts and constructing a section of siding longer than the length of the train can allow trains to run in opposite directions.

　　2、 Product Category:

　　At present, there are 15, 18, 22, 24, 30, 38, 43Kg/M, 75kg/m, 60kg/m, 50kg/m, 45kg/m, and 43kg/m types of steel rails in China. The standard turnout numbers (represented by frog numbers) include 6, 7, 9, 12, 18, 24, etc., and 9 and 12 * are commonly used. In sections where high-speed trains pass through the siding, large turnouts such as No. 18 and No. 24 need to be installed.

　　3、 Product composition:

　　A single turnout consists of a switch, frog, guard rail, connecting part, and switch sleeper. The type of single turnout is distinguished by the mass per meter of its steel rail and the number of turnouts. At present, a large number of 60kg/m rail fixed frog No. 12 single turnout switches are used on China's railway mainlines.

　　4、 Product features:

　　Each set of turnouts consists of a switch, switch center, two guard rails, and switch sleepers. The long handle uses the principle of lever to move the two movable tracks, allowing the vehicle wheel flange to enter the predetermined route in the opening direction. Due to the characteristics of large quantity, complex structure, short service life, limited train speed, low driving safety, and large maintenance investment, turnouts are known as the three weak links of the track, along with curves and joints. There are three basic forms of it: connection of lines, crossing, and combination of connection and crossing.

　　DK624-2-4 single switch for mining is used to facilitate the transportation of ore by laying railway tracks in mines. However, laying railways is difficult for mines, and the emergence of mining switches has brought good solutions to these problems. The use of mining switches greatly reduces the laying of railway tracks.

　　Shandong Yucheng Mining Equipment Co., Ltd. is located in Tai'an City, Shandong Province. The company produces and sells single switch, symmetrical switch, and crossover switch for mining, with a complete range of models. We provide equipment to every customer with sincere service and preferential prices. Welcome to inquire by phone.

AfterSalesService :

• DK624 mining single switch switch