FQC mining extraction type pneumatic axial flow local ventilation fan

Description :

　　FQCNO2.8Yucheng manufacturer of mining extraction type pneumatic axial flow local ventilation fan

　　FQCNO2.8Yucheng manufacturer of mining extraction type pneumatic axial flow local ventilation fan, FQCNO2.8Specification parameters of extraction type pneumatic ventilation fan, FQCNO2.8Structure of mining extraction type pneumatic axial flow local ventilation fan

　　1. FQCNO2.8 Extraction Pneumatic Ventilator Application Range:

　　This series of pneumatic fans adopts a structure driven by compressed air to drive the impeller to rotate, which is suitable for use in underground coal mines for extraction type local ventilation, and can also be used as local ventilation equipment in metallurgical mines, tunnel engineering, etc. It has a wide range of applications.

　　2. FQCNO2.8 Extraction Pneumatic Ventilator Parameters

　　3. FQCNO2.8 Extraction Pneumatic Ventilator Product Structure:

　　This series of pneumatic fans consists of components such as a collector, impeller, casing, and pneumatic motor. The structural components such as the casing and collector of the pneumatic fan are welded with low-carbon steel plates, while the pneumatic motor is connected to the casing with bolts. The impeller is welded together with the hub, blades, hollow shaft, and amplitude plate, and is directly connected to the output shaft of the pneumatic motor.

　　4. Working principle of FQCNO2.8 extraction type pneumatic ventilator:

　　The compressed air drawn out from the underground compressed air pipeline is connected to the air inlet of the pneumatic motor on the casing of the pneumatic fan through a rubber hose. After opening the valve, the compressed air drives the motor to rotate and drive the fan impeller to rotate. The impeller does work on the air, making it have energy and discharged from the fan at a certain speed. It is guided by the air duct to the required place.

　　5. Environmental conditions for the use of FQCNO2.8 extraction type pneumatic ventilation fan:

　　(1) The conveying medium is air, with a dust content not exceeding 10mg/m3, and a medium temperature of -200C to+350C.

　　(2) The installation elevation of the fan is -1000 meters to+1000 meters.

　　(3) The air supply under working conditions should be greater than the working air volume of the pneumatic fan.

　　(4) The installation of pneumatic fans should be based on a solid foundation, with no exposure to sunlight or rain around. The height of the air inlet (5) and edge of the pneumatic fan from the ground or top wall should not be less than 0.3 meters.

　　(6) The lifespan of the product used for this pneumatic fan is not less than 4 years.

　　Shandong Yucheng Mining Equipment Co., Ltd. produces and sells FBD series explosion-proof press in counter rotating axial flow local ventilation fans for coal mines, FQC2.8 pneumatic extraction ventilation fans, FQCNO3.15 pneumatic extraction ventilation fans, FQCNO4.0 extraction pneumatic ventilation fans, KCS-230D mining wet vibrating wire dust removal fan, KCS-410D mining wet vibrating wire dust removal fan, KCS120DMining wet dust removal fanWaiting for the fan manufacturer. The company adheres to the basic principle of "quality as steel, honesty as the foundation", and "honesty and trustworthiness, striving for excellence" as our business philosophy. We are willing to cooperate sincerely with people of all walks of life, work together, and create a brilliant tomorrow.

AfterSalesService :

• FQC mining extraction pneumatic ventilation fan