FQCN05.0 Pneumatic Extraction Axial Flow Local Ventilator

Description :

　　FQCN05.0Pneumatic extraction axial flow local ventilation fan Xishan Coal and Electricity Group

　　FQCN05.0Pneumatic extraction type local ventilation fan for Xishan Coal and Electricity Group,FQCNO5.0Manufacturer of pneumatic axial flow extraction fan in Inner Mongolia, distributor of extraction pneumatic fan in Shanxi

　　The FQCN05.0 pneumatic extraction type local ventilation fan consists of components such as a collector, impeller, casing, and pneumatic motor. The casing, collector and other structural components of the pneumatic fan are welded with low-carbon steel plates, while the pneumatic motor is connected to the casing with bolts. The impeller is welded together with the hub, blades, hollow shaft and amplitude plate, and is directly connected to the output shaft of the pneumatic motor.

　　Characteristics and parameters of FQCN05.0 pneumatic extraction type local ventilation fan

　　Pneumatic extraction type local ventilation fan models: FQCN02.8 small pneumatic extraction type fan, FQCN03.15 medium pneumatic extraction type fan, FQC05.0 large extraction type pneumatic fan.

　　FQC withdrawable pneumatic fan air volume: 180 m3/min, air pressure: 0.45 MPa, air consumption: 7.2 m3/min, diameter: 500mm, weight: 50 kg, length: 500mm

　　Before using the FQC extraction type pneumatic fan, please understand its working principle:

　　The extraction type pneumatic fan is connected to the pneumatic motor inlet on the casing of the pneumatic fan through a rubber hose and the compressed air drawn out from the underground compressed air pipeline. After opening the valve, the compressed air drives the motor to rotate and drive the fan impeller to rotate. The impeller works on the air, giving it energy and discharging it at a certain speed. It is guided to the required place by a dedicated positive and negative pressure air duct for the extraction type pneumatic fan.

　　What issues should be noted when using the FQCNo5.0 extraction type pneumatic fan?

　　1. Operators must undergo training, become familiar with the operation, and pass the qualification before taking up their posts with certificates;

　　2. Operators must carefully read this user manual before using the drilling rig;

　　Although the FQCN05.0 pneumatic extraction type axial flow local ventilation fan is small, it has all the necessary components. The FQCN05.0 pneumatic extraction type axial flow local ventilation fan is small in size, easy to transport, weighs only 50 kilograms, and has a significant effect. It can fully utilize the advantages of the FQCN05.0 pneumatic extraction type axial flow local ventilation fan. With advanced technology, Tai'an Yucheng Mining Equipment R&D, production, and sales are integrated, and the pneumatic motor is a gear motor with a simple structure and long service life. There is no need to worry about quality issues. The after-sales service is guaranteed by the manufacturer for one year. If any quality problems occur within one year, except for human factors, the manufacturer will only replace them without repairing them.

AfterSalesService :

• Pneumatic extraction axial flow local ventilation fan