FQC Mine Pneumatic Extraction Axial Flow Local Ventilator Parameters
Category:
mechanical equipment/Fans, exhaust equipment/Other fans and exhaust equipment
Model:
FQCNO4.0
Brand:
Tai'an Yucheng
Retail Price
5,000.00USD
重量
kg
- Product Description
-
Description :
FQCNO4.0Parameters of mining pneumatic extraction axial flow local ventilation fan
Parameters of mine pneumatic extraction axial flow local ventilation fan,FQCNO4.0Parameters of pneumatic local ventilation fan,FQCNO4.0Pneumatic extraction ventilation fan Shandong manufacturer
Parameters of FQC4.0 Pneumatic Extraction Local Ventilator:
Ventilation fan air volume: 2m3/s
Wind pressure: 215pa
Gas supply pressure: 0.45MPa
Gas consumption: 0.09m3/s
Speed: 3000r/min
Impeller diameter: 400mm
Weight: 41kg
Length: 450mm
Parameter table for FQC2.8 pneumatic extraction type local ventilation fan and FQC3.15 mining pneumatic extraction type axial flow local ventilation fan
model
air volume
M3/s
wind pressure
Pa
gas supply pressure
MPa
air consumption
M3/s
speed
r/min
diameter
mm
quality
Kg
length
mm
FQCNo2.8
zero point eight five
zero point four five
zero point zero two seven
three thousand
two hundred and eighty
eighteen point five
two hundred and thirty-five
FQCNo3.15
one
zero point four five
zero point zero three three
three thousand
three hundred and fifteen
twenty-five
two hundred and eighty
FQCNo5
three
three hundred
zero point four five
zero point one two zero
three thousand
five hundred
fifty-seven
five hundred
Structural diagram of FQC2.8 pneumatic extraction type local ventilation fan and FQC3.15 mining pneumatic extraction type axial flow local ventilation fan:
The mining pneumatic extraction axial flow local ventilation fan consists of components such as a collector, impeller, casing, and pneumatic motor. The casing, collector and other structural components of the mining pneumatic extraction type axial flow local ventilation fan are welded with low-carbon steel plates. The pneumatic motor is connected to the casing with bolts, and the impeller is welded together with the hub, blades, hollow shaft and amplitude plate. The impeller is directly connected to the output shaft of the pneumatic motor. The compressed air introduced from the compressed air pipeline is connected to the air inlet of the pneumatic motor on the casing of the pneumatic fan through a rubber hose. After opening the valve, the compressed air drives the motor to rotate, which in turn drives the fan impeller to rotate. The impeller works on the air, giving it energy and discharging it at a certain speed from the fan. It is then guided or directly discharged by a dedicated positive and negative pressure air duct for the fan.
FQCNO4.0 Mine Pneumatic Extraction Local Ventilator Coal Safety Certificate Manufacturer Tai'an Yucheng Mining Equipment Co., Ltd. Our company mainly targets coal mining enterprises and major distributors and purchasers of coal mines. Sincere cooperation can exchange for satisfactory services. Shandong Yucheng Mining Equipment Co., Ltd. supplies KCS-230D Mine Wet Vibrating Wire Dust Removal Fan and KCS-410D Mine Wet Vibrating Wire Dust Removal Fan, KCS120DMining wet dust removal fan， FQC2.8 pneumatic extraction type axial flow local ventilation fan, FQCNO3.15 pneumatic extraction type axial flow ventilation fan, FBD series coal mine explosion-proof press in counter rotating axial flow local ventilation fan, coal mine explosion-proof water tank, mining explosion-proof water bag, mining anti reverse chain, mining pneumatic concrete vibrator, PE-ZKW coal mine polyethylene bundle pipe, 8mm * 1 mining polyethylene bundle pipe. FQCNO4.0 mining pneumatic extraction type local ventilation fan coal safety certificate manufacturer selected Tai'an Yucheng. For more detailed parameter introduction, please consult our company's responsible person.
AfterSalesService :
Key words:- FQC mining pneumatic extraction ventilation fan
