3KW three-phase motor cutting machine wholesale J1G series profile cutting machine

Description :

　　3KWWholesale J1G series profile cutting machine for three-phase motor cutting machine

　　3KWWholesale of three-phase motor cutting machines, J1G series profile cutting machine prices, 4kw electric cutting machine, J1G-400 electric cutting machine manufacturer

　　We know that the cutting machine is composed of main components such as the body, machine base, steering bracket, motor, grinding wheel, and protective cover. The main structure of the machine is made of castings, so it has high strength and is lightweight. Yucheng will take you to learn about its related content.

　　1、 Introduction to the use of 3KW three-phase motor profile cutting machine

　　This profile cutting machine can be used to cut circular steel pipes, special-shaped steel pipes, cast iron pipes, round steel, angle steel, channel steel, flat steel and other profiles. Therefore, it can be widely used in industrial and mining enterprises in construction, petroleum, metallurgy, shipbuilding, machinery, material storage and other departments. It is an ideal cutting equipment for manufacturing and repair.

　　2、 Main technical parameters of 3KW three-phase motor profile cutting machine:

　　Rated power: 2.2KW/3KW/4KW

　　Rated voltage: 380V

　　Angle adjustment range: 0-45 degrees

　　Cutting blade specification: Φ 400 × Φ 32 × 3.2

　　Linear velocity: 53m/s

　　Idle speed: 2800r/min

　　Angle steel: ≤ 100 × 100 × 8

　　Channel steel: ≤ 100 × 48 × 5.3

　　Steel pipe: ≤Φ 100 × 6

　　Round steel: ≤Φ 50

　　Tip: The cutting diameter of the cutting machine refers to the diameter of a round steel with a tensile strength of 390Mpa.

　　3、 Instructions for using 3KW three-phase motor profile cutting machine:

　　1. When connecting the power supply, it should be noted that the power supply voltage must match the voltage of the machine, and the machine must be installed on a power supply with three-phase leakage protection device;

　　2. Before use, check whether all components are complete and secure, and whether the grounding and power lines are connected correctly and reliably;

　　3. After starting up, the rotation direction of the motor wheel must be consistent with the arrow on the belt cover. Reverse rotation is strictly prohibited;

　　4. Before cutting, it is necessary to check whether the workpiece is clamped and not loose, otherwise it will damage the grinding wheel and affect the cutting quality, and it is also prone to equipment and personal accidents. Before cutting, the operator must wear goggles and protective gloves;

　　5. When cutting, the appropriate cutting speed should be controlled according to the material, shape, and size of the profile, and excessive force should not be applied (it is advisable to feel that the grinding wheel does not slow down), otherwise the grinding wheel may break or burn out the motor;

　　6. After cutting the workpiece, lift the grinding wheel out of the incision and then stop the machine. The handrail should be restored to the resting position of the grinding wheel. It is forbidden to fully use the elasticity of the machine to reset, in order to avoid safety accidents;

　　7. This machine shall not work continuously at full load or overload for a long time, and the safe linear speed of the grinding wheel used shall be less than 70m/s;

　　The 3KW three-phase motor profile cutting machine is our company's flagship product, with good quality and competitive price. Our raw materials are tested and qualified before being put into production. We follow a step-by-step inspection and meticulous testing to ensure that every new and old customer can use it safely and with confidence.

AfterSalesService :

• Wholesale of 3KW three-phase motor cutting machine