FQCNO5.0 Pneumatic Extraction Axial Flow Local Ventilator

Description :

　　FQCNO5.0Pneumatic extraction axial flow local mining ventilation fan can be purchased with confidence

　　FQCNO5.0Where to sell pneumatic extraction axial flow local mining ventilation fans,FQCNO5.0Pneumatic extraction type axial flow local mining ventilation fan, pneumatic extraction type axial flow local mining ventilation fan Xishan Coal and Electricity Group

　　FQCNO5.0 pneumatic extraction axial flow local mining ventilation fan can be purchased with confidence. Our company provides one-stop service, quality assurance and worry free after-sales service. Although the pneumatic extraction axial flow fan is small in size, it has a large air volume and has been widely used in coal mines such as Datong Mining, Zao Mining Group, Xinwen Mining Group, Yongmei Group, Jiao Coal Group, Xishan Coal and Electricity Group.

　　Performance and parameters of FQCNO5.0 pneumatic extraction axial flow local ventilation fan:

　　parameter table

　　Working conditions of FQCNO5.0 pneumatic extraction fan:

　　The supply air volume should be greater than the working air volume of the pneumatic fan.

　　The height of the air inlet edge of the pneumatic fan from the ground or top wall should not be less than 0.3m.

　　Service life of FQCNO5.0 pneumatic extraction fan:

　　The service life shall not be less than 4 years, and the safe operation time before the second major overhaul shall not be less than 1200 hours. The FQCNO5.0 pneumatic extraction axial flow local mining ventilation fan has no vulnerable parts and has excellent quality. Whether it is product quality, service quality, or work quality, it ultimately depends on the "quality" of the people who manufacture the product, provide service, and manage it.

　　What issues should be noted when using the FQCNo5.0 extraction type pneumatic fan?

　　1. Operators must undergo training, become familiar with the operation, and pass the qualification before taking up their posts with certificates;

　　2. Operators must carefully read this user manual before using the drilling rig;

　　Before using the FQCNo5.0 extraction type pneumatic fan, please understand its working principle:

　　The extraction type pneumatic fan is connected to the pneumatic motor inlet on the casing of the pneumatic fan through a rubber hose and the compressed air drawn out from the underground compressed air pipeline. After opening the valve, the compressed air drives the motor to rotate and drive the fan impeller to rotate. The impeller works on the air, giving it energy and discharging it at a certain speed. It is guided to the required place by a dedicated positive and negative pressure air duct for the extraction type pneumatic fan.

　　How does the manufacturer transport the FQCNo5.0 withdrawable pneumatic fan after procurement?

　　FQC mining pneumatic extraction axial flow local ventilation fan must undergo factory inspection before leaving the factory. After passing the inspection, it is packaged and ready for transportation. Generally for whole machine transportation, it can be transported by land or water.

　　Shandong Yucheng Mining Equipment Co., Ltd. supplies KCS-230D mining wet vibrating wire dust removal fan and KCS-410D mining wet vibrating wire dust removal fan, KCS120DMining wet dust removal fan， FQC2.8 pneumatic extraction type axial flow local ventilation fan, FQCNO3.15 pneumatic extraction type axial flow ventilation fan, FBD series coal mine explosion-proof press in counter rotating axial flow local ventilation fan, coal mine explosion-proof water tank, mining explosion-proof water bag, mining anti reverse chain, mining pneumatic concrete vibrator, PE-ZKW coal mine polyethylene bundle pipe, 8mm * 1 mining polyethylene bundle pipe.

AfterSalesService :

• FQC Pneumatic Extraction Axial Flow Fan