Price of vibrating wire KCS-180LD mining wet ventilation and dust removal fan

Description :

　　KCS-180LDMine wet vibrating wire dedusting fan, safety production is more important than Taishan

　　Frequent and frequent coal mine accidents require attention to safety in production,KCS-180LDThe wet vibrating wire dust removal fan for mining can provide clean fresh air to the workers underground in the coal mine, filtering out the air containing dust and gas, allowing underground workers to work safely, prevent diseases, and ensure their families return home safely.KCS-180LDThe wet vibrating wire dust removal fan for mining has been widely used inShenhua Group, Yanzhou Coal Industry, Datong Mining, Zao Mining Group, Xinwen Mining Group, Yongmei Group, Coking Coal Group, Pingdingshan Coal Mining Group, Jingyuan Coal Industry and other ten major mining areas have more than 100 coal mines and achieved important results.

　　KCS-180LDMining wet dust removal fanOn the basis of summarizing the structure and technical performance of existing wet dust removal fans in China, a new generation of widely used energy-saving dust removal ventilation fans is developed and produced for various mobile and centralized dust sources underground and on the ground in mines.

　　KCS-180LDThe mining wet dust removal fan is suitable for dust removal of various mobile or concentrated dust sources underground and on the ground in mines, such as excavation workfaces, overturning areas, belt transfer areas, and anchor spraying machines in various dust producing workplaces.

　　KCS-180LDminingWorking principle of wet dust removal fan:

　　Dust laden air is sucked (pressed) into the dust remover by the fan power. When passing through the vibrating wire filter plate set inside, the water spray set in the incoming direction sprays spray on the vibrating wire filter plate. The fiber with water curtain can make the dust wet, increase weight, coagulate or stay. At the same time, because the passing dust laden gas makes the fiber vibrate under the impact of air flow, the conflict between the water mist particles and the dust in the dust laden gas is strengthened, which improves the capture rate of fine dust. The vibration also improves the self-cleaning ability of the vibrating wire filter plate's own fiber.

　　1. Water supply spray system 2, water quality filter 3, water inlet pipeline

　　4. Vibration string filter plate 5, dehydration device

　　Figure 1: Schematic diagram of dust collector structure

　　The KCS-180LD mining wet dust removal fan mainly consists of ① extraction centrifugal explosion-proof local ventilation fan, ② frame, and ③ dust collector.

　　1. Extraction centrifugal explosion-proof bureau ventilation fan 2, frame 3, dust collector

　　Figure 2: Schematic diagram of KCS-100 (120/180) LD series mining wet dust removal fan structure

　　We strongly recommend Tai'an Yucheng Mining Equipment Co., Ltd. as the manufacturer of KCS-180LD mining wet dust removal fan. Tai'an Yucheng takes the safety production of miners as its mission and is committed to researching and producing safer equipment.

AfterSalesService :

• KCS180LD dust removal fan