KCS Coal Mine Wet Vibrating Wire Dust Removal Fan Manual

Description :

　　KCS-120D/KCS-230D/KCS410D Coal Mine Wet Vibrating Wire Dust Removal Fan Manual

　　1. Overview:

　　The "KCS-120D/KCS-230D/KCS410D Coal Mine Wet Vibrating Wire Dust Removal Fan" is applied to dust production sites with concentrated dust, such as underground coal mines, rock tunnels, anchor spraying work faces, and mining work faces. Purifying dusty air on site and partially eliminating toxic and harmful components in the gas, effectively ensuring that the working environment meets industrial hygiene standards and protecting workers from dust and toxins.

　　The KCS-120D/KCS-230D/KCS410D coal mine wet vibrating wire dust removal fan (hereinafter referred to as the dust removal fan) is composed of a coal mine extraction explosion-proof local ventilation fan (hereinafter referred to as the fan) and a wet spiral wire dust collector (hereinafter referred to as the dust collector). The installed fan is an axial flow explosion-proof extraction local ventilation fan. As long as the working point design of the dust collector matches the resistance characteristics of the fan, the overall performance of the machine can be guaranteed to meet the design specifications.

　　KCS-120D/KCS-230D/KCS410D Wet vibrating wire dust removal fan for coal mines shall comply with the standard MT159-2005 "General Technical Conditions for Mining Dust Collectors" and Q/DF005-2013 "KCS SeriesMining wet dust removal fanEnterprise Standards.

　　This product is designed according to different requirements for air volume and usage conditions per unit time. The composition and representatives of the product models are as follows

　　The dust collector is made of metal material and has no unsafe factors.

　　The impeller and protective ring of the fan are paired with materials that comply with the requirements of GB/T13813-2008 "Safety Test Methods and Judgment Rules for Friction Sparks of Metal Materials Used in Coal Mines".

　　There are specialized models designed for the capture of cement dust that can be opened and cleaned.

　　The KCS-120D/KCS-230D/KCS410D coal mine wet vibrating wire dust removal fan and supporting motor have explosion-proof type, explosion-proof mark Exd Ⅰ Mb, and comply with the requirements of GB3836.1-2-2010.

　　Normal working conditions of KCS-120D/KCS-230D/KCS410D wet vibrating wire dust removal fan for coal mines:

　　Applicable ambient temperature: 0-40 ℃;

　　Altitude not exceeding 1000 meters;

　　Relative humidity ≤ 95% (25 ℃);

　　Used for underground coal mines containing methane and coal dust explosive gases;

　　Atmospheric pressure: (86-106) kPa;

　　Applicable spray water supply pressure: ≥ 0.3MPa;

　　Applicable dust concentration range: (0-24000) mg/cm3.

　　2、 Performance and main technical parameters of KCS-120D/KCS-230D/KCS410D wet vibrating wire dust removal fan for coal mines

　　1. Total dust removal efficiency: ≥ 97%

　　2. Liquid ratio: ≤ 0.4L/m3.

　　3. Processing air volume m3/s: series models.

　　4. Applicable dust concentration range: C ≤ 24000mg/m3 processing air volume.

　　5. Working mode: Continuous work.

　　6. Applicable ambient temperature: 0 ℃~40 ℃.

　　7. Applicable dust types: hydrophilic dust such as coal, rock, cement, etc.

　　8. Explosion proof motor voltage: 380V/660V or 660V/1140V (specified when ordering).

　　KCS-120D/KCS-230D/KCS410D Wet vibrating wire dust removal fan for coal mines Main technical parameters table of mining wet dust removal fan

　　Tai'an Yucheng Mining Equipment Co., Ltd., founded in 2015, is located in the well-known Mount Taishan Youth Entrepreneurship Development Zone at the foot of Mount Taishan Mountain. It is close to Beijing Fuzhou Expressway, Beijing Shanghai Expressway and Beijing Shanghai High speed Railway. With convenient transportation, it extends in all directions and gathers the beautiful natural scenery of Mount Taishan Mountain and strong Qilu culture. The company is a private enterprise mainly engaged in the design, development, production, and sales of large and small equipment for coal mines. Its products have been widely used in more than 100 coal mines in ten major mining areas, including Shenhua Group, Yanzhou Coal Industry, Datong Mining, Zao Mining Group, Xinwen Mining Group, Yongmei Group, Coking Coal Group, Pingdingshan Coal Mining Group, Jingyuan Coal Industry, etc., and have achieved important results. Tai'an Yucheng produces KCS-120D/KCS-230D/KCS410D wet vibrating wire dust removal fans for coal mines. Customer needs are the direction of our efforts. KCS-120D/KCS-230D/KCS410D wet vibrating wire dust removal fans for coal mines are our company's flagship equipment. If you have any needs, please call me. Thank you for your support. Yucheng will continue to strive to produce more equipment and products to meet market demand.

AfterSalesService :

• KCS vibrating wire dust removal fan