Direct sales from railway NZG-31 internal combustion hollow drilling machine manufacturer

Description :

　　For railway useNZG-31 Internal Combustion Hollow Drilling Machine

　　NZG31Railway internal combustion rail drilling machine, NZG railway rail drilling machine, Yucheng brand rail drilling machine manufacturer, NZG23 internal combustion rail drilling machine manufacturer

　　Tai'an Yucheng Mining Equipment Co., Ltd. is now launching a large batch of NZG-31 internal combustion steel rail drilling machines at a discounted price. Adhering to the principle of integrity, we support cash on delivery and inspection, allowing you to buy with confidence.

　　According to different power sources, rail drilling machines can be divided into three types: electric rail drilling machines, hydraulic rail extruders, and the internal combustion rail drilling machines we are talking about today. The models are divided into three types: NZG13, NZG23, and NZG31.

　　1、 Characteristics of NZG-31 Internal Combustion Rail Drilling Machine

　　The NZG-31 internal combustion rail drilling machine has a compact structure and is currently one of the lightweight drilling machines in China. The rail clamping device has self-locking function, accurate positioning, and high drilling accuracy. Hollow drill is used, and the drilling diameter range is φ 9.8mm~φ 32mm (Fried Dough Twists drill); Diameter 16mm to 31mm (hollow drill bit). During drilling, it has an automatic water supply function and is an essential tool for maintenance, repair, and overhaul operations in the engineering department.

　　2、 The main parameters of NZG-31 internal combustion rail drilling machine are shown in the following table:

　　1. Internal combustion engine power: 1.2kW3

　　2. Idle speed: ≥ 270r/min

　　3. Drilling diameter range: φ 9.8mm~φ 32mm (Fried Dough Twists bit); Diameter 16mm to 31mm (hollow drill bit).

　　4. Drilling time: ≤ 40s

　　5. Whole machine quality (including handle): 17kg7

　　6. Dimensions: 650 × 230 × 250 units

　　7. Internal combustion engine model: Four stroke Honda gasoline engine GX352

　　3、 Precautions for safe operation of NZG-31 internal combustion hollow drilling machine:

　　1. The following items must be checked before starting up:

　　Check the condition of the card rail: Adjust the top thread of the card rail according to the rail type. If it is too loose, the card cannot be securely installed; If it is too tight, it is easy to damage the fixture head.

　　Check the spindle for drilling Drill back without any jamming phenomenon.

　　Check the connection between the motor and the frame screws.

　　Before starting the task, the internal combustion engine must idle for half a minute until it runs smoothly without any abnormalities before proceeding with the work

　　3. Apply even force when drilling to prevent the drill bit from getting stuck.

　　4. During drilling, it is necessary to prevent cooling water from splashing onto the motor

　　When drilling through the hole, slow down the drilling speed to prevent damage to the drill bit.

　　After drilling is completed, the power switch must be turned off before unloading the machine. Do not touch the drill bit until it has completely stopped rotating.

　　Note: Before using the internal combustion rail drilling machine, it is necessary to carefully read the instructions provided by our company. The staff must hold a certificate and strictly discipline themselves and others. Everyone is responsible for safety production.

AfterSalesService :

• Manufacturer of rail internal combustion drilling machine