Technical parameters of D60 explosion-proof electric heater

Description :

　　D60Technical parameters of explosion-proof electric heater

　　D60Technical parameters of explosion-proof electric heater, D60 for coal minesExplosion proof electric heater manufacturer in Shandong, D60Explosion proof electric heater

　　1、 Explosion proof electric heater model: D60

　　Dimensions (length x width x height mm): 800 x 650 x 650

　　Exhaust temperature: 45 ℃ Noise: 60 dB

　　Airflow: 3310-4100m3/h Voltage: 220/380V

　　Motor power: 390/540KW Heater power: 42-45KW

　　2、 Technical characteristics of D60 electric heater product

　　The D60 electric warm air blower heater is divided into stages, the fan is single speed, and the equipment is equipped with a switch control for use. Low noise, small size, suitable for fixed or temporary use on the ground. The shell is treated with steel plate electrostatic spraying, which is sturdy, shock resistant and impact resistant. Adopting carbon steel finned tube electric heater and aluminum alloy blade axial flow fan. Using 380V voltage and delta connection, suitable for use in places without neutral wires.

　　3、 What is the difference between D60 coal mine electric heater and GS explosion-proof heater?

　　What is the difference between D60 coal mine electric heater and GS explosion-proof heater? Coal mine electric warm air blower is a special type of electric warm air blower. Due to the special working environment, mining electric warm air blowers need to have explosion-proof characteristics. At this time, our fan motors need explosion-proof characteristics. Of course, in addition to electric heating, we also have S-type and GS type warm air blowers. The main difference between them is the heating method. D-type warm air blowers use electric heating, while S-type and GS type warm air blowers use water heating, which is suitable for coal mining enterprises with boilers and is an energy-saving heating method. 4、 What do you know about the installation of D60 electric heater?

　　Installation: A shut-off valve should be installed on the inlet and outlet pipes of the heater. If the air inlet of the heater is directly connected to the outside, a blocking device should be installed at the outdoor air inlet to prevent the heat dissipation pipe from being frozen when not in use.

　　Shandong Yucheng provides one-on-one service, patient sales, and reliable after-sales service.

AfterSalesService :

• Technical parameters of D60 explosion-proof electric heater