Micro ZBQ27/1.5 Pneumatic Single Liquid Grouting Pump Single Rod Pump

Description :

　　Micro ZBQ27/1.5 Pneumatic Single Liquid Grouting Pump Single Rod Pump

　　miniatureZBQ27/1.5Mining pneumatic single liquid injection pump manufacturer, pneumatic single liquid injection pump single bar pump, Tai'an, ShandongZBQ27/1.5Pneumatic single liquid injection pump

　　1、 Introduction

　　The miniature ZBQ27/1.5 mining pneumatic single liquid injection pump has a simple structure and is easy to carry. It is called a small pneumatic single liquid injection pump. Despite the small injection pump, it can play a huge role. The small ZBQ27/1.5 mining pneumatic single liquid injection pump can be purchased individually or as a set. The supporting equipment includes a single bar injection pump, a mixing bucket, and a pneumatic mixer. The grouting pump can be used for tunnel water conservancy, mine, building and other cement slurry grouting, gap filling, broken rock reinforcement and other the Pearl River swimming.

　　2、 The principle of ZBQ-27/1.5 pneumatic grouting pump:

　　The portable ZBQ-27/1.5 pneumatic grouting pump compresses air through a ball valve, a dual air source, and a two position five way directional valve into the cylinder, pushing the cylinder piston to make reciprocating motion. Due to the connection between the cylinder rod and the slurry cylinder rod, the reciprocating motion of the cylinder piston also drives the reciprocating motion of the slurry cylinder piston to complete the suction and discharge action. The direction change is controlled by a dial installed on the cylinder rod, which moves the stroke valve back and forth to change the direction of the cylinder's intake and exhaust, and continuously completes the reciprocating motion of the cylinder piston.

　　3、 Parameters and characteristics of pneumatic single liquid injection pump:

　　ZBQ-27/1.5 Pneumatic grouting pump for coal mines has a small volume, light weight, and reliable use. It can be safely used in flammable, explosive, temperature and humidity changing places.

　　4、 Usage and after-sales service:

　　1. Ensure that the gas source is free of excessive moisture and dirt, and ensure the lubrication system of the gas source oil. Optional oil mist generator provided by our factory.

　　2. The air source pipe should first be connected to the ventilation pipe to blow away debris, and then reliably connected to the grouting pump.

　　3. Firstly, immerse the inlet of the pump in clean water and slowly open the inlet ball valve to ensure that the grouting pipeline is unobstructed and the seal is in a leak free state.

　　4. The slurry should be mixed evenly, without lumps, but thick. Timely clean the solidified materials at the corners and edges of the bucket to prevent them from being mixed into the slurry.

　　5. Immerse the inlet of the pump into the slurry, slowly open the inlet ball valve, and gradually increase to the appropriate grouting speed. Tai'an Yucheng Mining Equipment Co., Ltd. implements the "three guarantees" for the products sold, wholeheartedly serving customers, providing long-term supply of accessories, training maintenance personnel, and ensuring that the product can achieve economic benefits for you. There's nothing you can't do, only you don't do it. The choice of each coal mine is different, and it is purchased according to the needs of the coal miners' work.

AfterSalesService :

• Mining pneumatic single liquid injection pump manufacturer