Pneumatic MQ19-400/63 anchor cable tensioning machine is selling well

Description :

　　Tai'an Yucheng is a strong factory specializing in the production of mining equipment. Its products include manual anchor cable tensioning equipment, pneumatic anchor cable tensioning equipment, electric anchor cable tensioning equipment, MTS series anchor cable release device, MQS anchor cable steel strand cutter, MQG anchor rod steel bar cutter, LDZ series mining needle display anchor rod tension meter, MCZ mining anchor rod tension meter, SYB dual outlet manual hydraulic pump, etc. Adequate inventory and competitive prices, hurry up and place your order.

　　1、 Overview of MQ19-400/63 Anchor Cable Tensioning Machine Structure:

　　The MQ19-400/63 anchor cable tensioning tool consists of three parts: a pneumatic hydraulic pump, a high-pressure hydraulic hose, and an anchor cable tensioning jack.

　　2、 Maintenance and Repair of MQ19-400/63 Anchor Cable Tensioning Equipment

　　1. Check the oil pipe and its connections at any time for signs of oil leakage, no rupture or other damage, no damage to the hose, and no oil leakage in any part of the jack;

　　2. When tensioning, the external anchor, steel strand, and jack should be in a coaxial position

　　3. After dismantling the oil pipe, the exposed nozzle should immediately wear a dust cap;

　　4. The cone top must be tightened to the bottom with the middle cylinder, and it must not work when it is loose;

　　5. Without practical need, try to avoid working the tensioning jack under excessive pressure, especially when the middle cylinder has been retracted during the return journey or when the middle cylinder has reached the end during the lift;

　　6. During disassembly and installation, precautions should be taken to prevent the clamping, collision, deformation, and scratching of various parts. During installation, the parts must be kept clean and the mating surfaces must be coated with lubricating oil.

　　7. The inner locking plate (tool anchor) must be cleaned regularly to prevent the tooth slot from being filled with debris and unable to bite the anchor cable.

　　3、 Advantages of MQ19-400/63 Anchor Cable Tensioning Machine

　　1. Low noise and high reliability

　　2. High output pressure with small pressure fluctuations.

　　3. Easy to move, high pressure, and wide adjustment range.

　　The operator only needs to turn the switch to work, with low labor intensity.

　　Structural characteristics and working principle of MQ19-400/63 anchor cable tensioning equipment

　　2.1 MQ19-400/63 Anchor Cable Tensioning Tool Pneumatic Dual speed Reversing Oil Pump

　　The pneumatic dual speed reversing oil pump mainly consists of a reversing valve, pressure gauge, cylinder barrel, high-pressure oil suction valve, high-pressure plunger

　　Composed of low-pressure relief valve, low-pressure oil suction valve, low-pressure plunger, piston, pneumatic directional valve, cylinder, intake pipe, etc. There are inlet and outlet valves, directional valves, etc. inside the pump body.

　　The characteristic of the dual speed reversing pneumatic oil pump is that it is composed of dual plungers. When the oil pump is working, the dual plungers work simultaneously to quickly change and drain the oil. When the pressure reaches a certain value, the oil sucked in by the large plunger returns to the reservoir through the low-pressure relief valve, and the small plunger continues to discharge oil to the rated pressure. This not only improves efficiency but also reduces work resistance

　　2.2MQ19-400/63 Anchor Cable Tensioning Machine Jack

　　The jack of MQ19-400/63 anchor cable tensioning machine is mainly composed of a support seat, a top, a slack device, a cable clamp, a clip body, a piston, an inner pull rod, a cylinder tube, a rear end cover, a rear cover, a quick change joint, an oil pipe, etc.

　　The MQ19-400/63 anchor cable tensioning machine adopts a tensioning jack matched with a pneumatic dual speed reversing oil pump, and connects the oil pipe with a quick change joint.

　　Tai'an Yucheng is at the forefront of technology, focusing on manufacturing high-quality products.

AfterSalesService :

• Pneumatic anchor cable tensioning equipment