SY-60B single hydraulic prop pressure gauge, boost pressure gauge

Description :

　　SY-60BSingle hydraulic prop pressure gauge|Boost pressure gauge

　　Zigong Coal MineSY-60BSingle hydraulic prop pressure gauge, supplier quotationSY40Single pillar pressure gauge, Shandong Yucheng single pillar pressure gauge manufacturer

　　Tai'an Yucheng Mining Equipment Co., Ltd. produces YHY60 mining comprehensive mining hydraulic support digital pressure gauge. Both single channel and dual channel options are available. YH60 comprehensive mining support pressure gauge, single gauge, double gauge, KY-82 roof dynamic instrument, digital roof dynamic instrument. Digital anchor cable dynamometer. SY-60 single column pressure gauge, SY-40 pressurized single column pressure gauge only needs to be replaced without repair.

　　1、 Purpose:

　　The SY-60B single hydraulic pillar pressure gauge, produced, sold, and developed by Tai'an Yucheng Equipment Company, is widely used in Inner Mongolia, Shanxi, Guizhou, Taiyuan, Sichuan, Changzhi, Lvliang, and other places to monitor the working support force of single hydraulic pillars. It can measure the support force and perform fluid replenishment at any time. The pressure gauge for single pillar is an indispensable part of using single pillar in coal mines, and it is the standard for detecting the safety of coal mine pillars.

　　2、 Technical features:

　　The SY-60B single hydraulic prop pressure gauge is easy to install, easy to operate, lightweight, and durable. Our company guarantees this product for one year. When using the single prop pressure gauge, an injection gun can be used to refill the pillar. The quick connector can be connected to a pointer pressure gauge or a pressure sensor for wired remote multi-point and multi column support force monitoring.

　　3、 Technical parameters of SY-60B single hydraulic prop pressure gauge

　　Pressure gauge range: 0-40Mpa

　　Working fluid: emulsion

　　Accuracy of pressure gauge: Level 2.5,

　　Accuracy of pressure sensor: Level 1

　　4、 Main technical specifications of SY-60B single hydraulic prop pressure gauge

　　1. Model SY-40, SY-60B

　　2. Accuracy: Level 2.5;

　　3. Measurement range: 0-40MPa, 0-60MPa;

　　4. Dial outer diameter: 40mm, 60mm

　　5. Applicable environment: Temperature -10 ℃ to+50 ℃, humidity not exceeding 98% relative humidity

　　5、 Instructions for Using SY-60B Single Hydraulic Support Pressure Gauge

　　1. Before use, first reset the auxiliary needle (red needle) to zero by hand, and then perform a pressure test, where the main needle (black needle) displays the current pressure and the auxiliary needle displays the maximum pressure during the testing process.

　　2. After use, the needle should be reset to zero.

　　3. Do not open the pressure gauge after it malfunctions to avoid damage.

　　4. The calibration regulation for this pressure gauge is JJG52-87.

　　5. When a device uses two or more pressure gauges, a boxed mining double needle shock resistant pressure gauge can be selected.

AfterSalesService :

• Single hydraulic prop pressure gauge