New Mining Anchor Rod Dynamometer MCZ-400 Anchor Rod Dynamometer

Description :

　　New Mining Anchor Rod Dynamometer MCZ-400 Anchor Rod Dynamometer

　　Mining anchor rod dynamometer, MCZ-400 type anchor rod dynamometer, mining anchor rod dynamometer model, mining anchor rod dynamometer price, anchor rod dynamometer

　　The new MCZ-400 mining anchor force gauge, also known as anchor force gauge, is used to measure the force situation of the anchor rod in the surrounding rock of the roadway at various stages. The purpose is to grasp the operating law of the roadway surrounding rock through the measurement of the anchor rod hydraulic force gauge, and specifically determine the activity period and stable period of the roadway surrounding rock, so as to take targeted support measures.

　　1、 Instructions for using MCZ-400 mining anchor force gauge:

　　1. For anchor rod support, it is required to place the anchor rod perpendicular to the support surface, and try to align the anchor rod with the protective plate, pillow box, and anchor rod as much as possible to ensure even force distribution.

　　2. For non anchor pressure measurement occasions, the pillow box is clamped between two disc-shaped protective plates, and the direction of the measured pressure should be perpendicular to the pillow surface. The center of the applied force should coincide with the center of the pillow surface as much as possible.

　　2、 Working principle of MCZ-400 mining anchor rod dynamometer:

　　When the top plate is pressed, the pressure box cover is subjected to force, and the lithium based lubricating oil inside the pressure box is subjected to pressure. The force value is transmitted through the pressure gauge oil pipe to the force meter and displayed. The magnitude of the force value is proportional to the force acting on the pressure box.

　　3、 MCZ-400 Mining Anchor Rod Dynamometer Safety Warning:

　　1. When installing the anchor rod force gauge, the fixing nut must be tightened after the anchor rod is inserted into the center hole.

　　2. Oil leakage was found at the joint of the force meter, and the seal should be replaced promptly and lithium based lubricating oil should be replenished.

　　3. The dedicated force value indicator provided by our company shall not be replaced by users at will; The force indicator should be regularly calibrated in accordance with the national metrological verification regulations; If damage is found, a force meter that complies with the measurement method should be replaced;

　　4. The force gauge must not be subjected to local force, and other parts outside the pressure box cover must not be subjected to force, otherwise it will affect the measurement accuracy of the product;

　　4、 Precautions and maintenance requirements:

　　1. The product should be stored in a cool, dry, and well ventilated place.

　　2. After use, the pressure gauge shall be protected with plastic foam and stored in an appropriate place.

　　3. Install a powerful value gauge on the product and strictly prohibit strong vibrations, impacts, and drops to avoid damaging the product and affecting its effectiveness.

　　Yucheng Equipment Co., Ltd. adheres to the boldness and sincerity of Shandong people. We sincerely invite experts and leaders to visit our company for inspection, guidance, and advice, and look forward to sincere cooperation with you.

AfterSalesService :

• Mining anchor rod dynamometer