Performance of the new TG100/200 prestressed torque wrench

Description :

　　TG100/200Performance of the new prestressed torque wrench

　　TG100Pre stress torque wrench, TG200 pre stress torque wrench, pre stress wrench, performance of pre stress torque wrench, TG pre stress torque wrench has high cost-effectiveness

　　Shandong Yucheng Company is a high-tech enterprise specializing in the research, production, and sales of various manual torque tools (torque wrenches, torque screwdrivers, torque multipliers), hydraulic torque tools (hydraulic wrenches, hydraulic pumps), torque tool calibration instruments (torque wrench calibration instruments, torque screwdriver calibration instruments), and related accessories.

　　Introduction to Yucheng brand TG100/200 prestressed torque wrench:

　　Pre installed torque wrench is a new generation of high-quality torque wrench developed and produced by our company with international advanced level. The product series is complete, with features such as high precision, beautiful appearance, easy use, good reliability, and replaceable head. Widely used in industries such as aerospace, aviation, shipbuilding, automobiles, railways, engineering machinery, and electricity, it is an essential tool for ensuring and improving product quality.

　　Yucheng brand TG100/200 prestressed torque wrench Purpose:

　　Anchor bolt prestressing torque wrench is mainly used for delamination and collapse accidents in anchor spraying tunnels. Due to the failure to tighten the nut after anchoring the anchor bolt during installation, the degree of tightening of the nut is the key to the effectiveness of the anchor bolt. The evaluation of its tightening degree relies solely on the detection data of the anchor bolt prestressing torque wrench. The anchor bolt prestressing torque wrench can measure the prestressing force, ensuring that the anchor bolt is under the same force and displaying N.m.

　　Characteristics of Yucheng brand TG100/200 prestressed torque wrench:

　　1. Equipped with preset torque values and signaling devices. When the tightening torque of the fastener reaches the preset value, it can automatically emit a signal "click" sound accompanied by obvious tactile vibration. After releasing the force, all relevant parts of the wrench will automatically reset.

　　2. The shell is made of special steel pipes, which have a beautiful appearance.

　　3. The wrench head has added a bidirectional ratchet device, making it more convenient to use.

　　Usage of digital torque wrench:

　　4. Determine the preset torque value based on the required torque value requirements.

　　When setting the torque value, insert the hexagonal adjustment key into the end of the wrench, then rotate it to adjust the scale markings to the desired torque value. After adjustment, pull out the key.

　　6. Install the corresponding socket on the square tenon of the wrench and insert the fastener, then slowly apply force on the handle. When tightened to the point where a signal (click) stops (to achieve the preset torque value), the task is completed in one go.

　　7. If not in use for a long time, adjust the scale markings to the minimum torque value.

　　If you would like to know more about the specifications, prices, and promotional activities of our company's products, please contact us.

AfterSalesService :

• TG100 prestressed torque wrench