Energy saving and environmentally friendly DN400 pneumatic fully automatic slurry sampler found by Yucheng

Description :

　　Energy saving and environmentally friendly DN400 pneumatic fully automatic slurry sampler found by Yucheng

　　DN400Pneumatic fully automatic slurry sampler, DNFully automatic slurry sampling machine, automatic slurry sampling machine

　　The fully automated slurry sampling machine can be understood literally as a slurry sampling device installed on a pipeline. However, if you have a detailed understanding of its structure, working principle, and other aspects, there are still many precautions to be taken. Today, Yu will explain to you:

　　1、 Product Introduction of Fully Automatic Slurry Sampling Machine:

　　The fully automatic slurry sampling machine is an electromechanical integrated fully automatic equipment composed of a pipeline type shell (with a special structure), a piston type sampling spoon, a sampling tube, a sealed guide component, a power transmission system, and an electrical control part.

　　The main slurry flow produced normally by the fully automatic slurry sampling machine has no drop loss. It is injected from the inlet and flows in the direction of the arrow inside the shell. When not sampling, the power transmission system is controlled by an electronic controller. The sampling tube and spoon are placed at the bottom dead center through the lifting plate, and the sampling port of the sampling spoon is completely closed to ensure no slurry leakage.

　　2、 Detailed parameters of fully automatic slurry sampling machine

　　Sampling objects: various slurry materials such as slurry, coal slurry, cement slurry, etc.

　　Power requirements: 220vac ± 10% or 380vac ± 10% 50hz, 20w

　　Clear water source pressure: 0.6mpa max

　　Water consumption: 30l/min (only during the water flushing cycle)

　　Air source pressure: 0.4-0.6mpa

　　Measuring pipe diameter: dn 70-400mm

　　Environmental temperature: 5-50 ℃

　　Relative humidity: 0-80% at 35 ℃

　　Air consumption: 20nl/min

　　3、 Advantages of fully automatic slurry sampling machine:

　　The DN4 inch pneumatic fully automatic slurry sampler is a pipeline slurry sampling device with a simple structure, reasonable design, and easy installation and use. It is suitable for all conditions of slurry pipeline transportation (or self flow). The slurry flow is uniformly intercepted vertically by the sampling spoon, fully meeting the requirements of mining slurry sampling. It has high sampling accuracy and strong representativeness. It is an integrated fully automatic equipment composed of a pipeline type shell (special structure), a piston type sampling spoon, a sampling tube, a sealed guide component, a power transmission system, and an electrical control part, which replaces other sampling machines.

　　The various products produced by Tai'an Yucheng Mining Equipment Co., Ltd. have the ability to be cast, processed, assembled, and completed in one go, ensuring the quality of each factory product. According to the needs of users, various specialized equipment for fully automatic slurry sampling machines can be designed to meet the actual needs of different projects in construction, water and electricity, transportation, mining and other units; In addition, our company has a team with business capabilities, familiar with the various performance aspects of our products, and provides integrated services, allowing you to experience great value for money.

AfterSalesService :

• DN400 Pneumatic Fully Automatic Slurry Sampling