MS18-250/63 new anchor cable tensioning equipment usage method

Description :

　　MS18-250/63Anchor cable tensioning equipment, new high-energy anchor cable tensioning equipment usage method

　　MS18-250/63Anchor Cable Tensioning Machine, Manufacturer of Mining Manual Anchor Cable Tensioning Machine, New High Energy Anchor Cable Tensioning Machine, Model of MS Anchor Cable Tensioning Machine, Instructions for Using Anchor Cable Tensioning Machine

　　1. MS18-250/63 Anchor Cable Tensioning Machine Product Overview:

　　MS18-250/63 anchor cable tensioning machine is a specialized tensioning machine used for monitoring the anchoring force of anchor cables underground in coal mines. It is mainly used for stress release of the roof of coal mine tunnels, recovery of rigging and support beams, and manual forced caving to avoid large areas of hanging in goaf. It consists of a dual speed reversing oil pump, a high-pressure oil pipe assembly, and an anchor cable puller.

　　2. MS18-250/63 Anchor Cable Tensioning Machine Product Features:

　　MS15-250/63 anchor cable tensioning equipment is mainly used in anchor spray support engineering of coal mines and other mines. Measuring the anchoring force of anchor cables is of great significance for engineering quality inspection and anchor cable research. It has the characteristics of small size, light weight, simple operation, safety and reliability

　　3. Structure composition of MS18-250/63 anchor cable tensioning equipment:

　　(1) The dual speed directional oil pump of the anchor cable tensioning machine is mainly composed of a quick plug seat, a quick plug, a pressure gauge, a pump body, a directional handle, an oil reservoir, a foot pedal bracket, a refueling hole cover, a pressure rod handle, etc. There are inlet and outlet valves, sequence valves, unloading valves, etc. inside the pump body.

　　(2) The high-pressure oil pipe assembly of the anchor cable tensioning machine mainly consists of quick connectors, pressure pipes, high-pressure oil pipes, quick connector seats, etc. The connection of the pipeline adopts a quick connector, which adopts a steel ball locking radial seal.

　　(3) The anchor cable tensioning machine jack is mainly composed of a quick connector seat, quick connector, handle, oil cylinder, support seat, etc.

　　4. Instructions for using anchor cable tensioning equipment:

　　(1) Check the oil level:

　　Unscrew the oil filling hole cover at the rear of the dual speed reversing oil pump and check the oil level. If the oil is not sufficient, it should be replenished in a timely manner. (To add L-HM32 # anti-wear hydraulic oil)

　　(2) Working process:

　　First, release the unloading handle of the oil pump reversing direction, then remove the dust cap on the oil pump, anchor cable puller, and quick connector seat. Then connect the dual speed reversing oil pump and anchor cable puller with high-pressure oil. At this point, gently push the outer sleeve at the front end of the quick connector with your hand, and insert the quick connector of the high-pressure oil pipe into the quick connector seat (at the rolled area). The outer sleeve at the front end of the quick connector seat will reset under the action of the spring. After checking the reliability of the connection, tighten the reversing unloading handle on the pump body counterclockwise, shake the pressure rod handle up and down, and apply even force without applying too much force. Observe whether the piston in the anchor cable puller cylinder extends.

　　(3) Tighten the reversing unloading handle clockwise, and retract the oil pump reversing piston. The initial use can be repeated several times to remove any air mixed into the system. After the inspection is correct, tighten the reversing unloading handle counterclockwise, and then shake the pressure rod handle to gradually increase the pressure. When the pressure reaches 63MPa, it reaches the rated pressure.

　　This product has been exported to various countries across the country, including the United States, France, Canada, Indonesia, Russia, Vietnam, Australia, South Korea, Iran, and has received unanimous praise from customers. If you need, please feel free to contact us.

AfterSalesService :

• Anchor cable tensioning equipment