KFU0.75 6 dump truck parameters reference 0.75 cubic dump truck

Description :

　　KFU0.75-6Reference for parameters of dump truck zero point seven fiveCube dump truck

　　KFU0.75-6Dump truck,KFU0.75-6Parameters of dump truck,zero point seven fiveCube dump truck

　　Tai'an Yucheng is a long-term manufacturer of mining equipment. We have high reputation raw material suppliers and skilled staff, and can ship within one day. Customized products can be shipped within one week. And it can provide dedicated car delivery and support inspection.

　　1、 KFU0.75-6 dump truck features:

　　1. KFU0.75-6 dump truck does not require any auxiliary facilities and can automatically flip left and right, making it flexible and lightweight.

　　2. The frame is a metal structure that can withstand traction force, automatic force, collision force between mining cars, and rail impact force;

　　The structure of the 3KFU0.75-6 dump truck is sturdy. Beautiful appearance, reliable performance, flexible and stable operation, and other advantages

　　4. The KFU0.75-6 tipping bucket mining car frame adopts a riveted welding structure, which reduces the influence of stress on the mining car and increases its service life;

　　The KFU0.75-6 dump truck can ensure smooth operation on both curved and straight roads.

　　2、 Mining KFU0.75-6 dump truck parameters:

　　Model: KFU0.75-6

　　Volume: 0.75 cubic meters

　　Load capacity: 1800kg

　　Track gauge: 600mm

　　Dimensions: 1700 * 980 * 1250mm

　　Wheelbase: 600mm

　　Net thickness: 300mm

　　Traction height: 320mm

　　Rated traction force: 60KN

　　Small plane operating radius: 9m

　　Vehicle weight: 520KG

　　3、 The model of KFU0.75-6 dump truck for mining is:

　　4、 Precautions for safe use of KFU0.75-6 dump truck for mining

　　1. The KFU0.75-6 dump truck for mining is strictly prohibited from being overloaded.

　　2. The mining KFU0.75-6 dump truck must be used on a track that meets the standards.

　　3. The mining KFU0.75-6 dump truck cannot withstand strong impacts. When using on inclined shafts, it is necessary to insert the safety pins on both sides of the carriage. Check the integrity of the car box positioning device for each shift, and ensure that the height of the positioning block and positioning pin engagement is not less than 10mm. When the wheel tread wears down to a thickness of 12mm, it must be replaced.

　　4. When transporting materials with KFU0.75-6 dump truck for mining, the inclined shaft length is not more than 300m, ≤ 3.5m/s; When the length of the inclined shaft is greater than 300m, ≤ 5m/s; Speeding is strictly prohibited.

　　5. Key positions and connections of mining cars used on inclined shafts should be checked daily. When cracks, deformations or exceeding wear standards are found, they should be replaced immediately. The allowable wear of any section of the buffer pin hole, pin, three ring chain, steel rope hanging ring, safety pin and other accessories is ≤ 10%. Any section with wear exceeding 10% is not allowed to be used in inclined shafts or can be used in flat tunnels.

AfterSalesService :

• KFU0.75 6 dump truck