Cone ball mill XMQ240 * 90 laboratory ball mill with good quality

Description :

　　tapered ball millXMQ240×90 Good quality laboratory ball mill

　　XMQ240×90Laboratory Cone Ball Mill, Introduction to Cone Ball Mill,XMQManufacturer of conical ball mill, laboratory conical ball mill

　　Tai'an Yucheng Mining Equipment Co., Ltd. is engaged in the production and sales of laboratory crushing, sampling, and sampling equipment. The company's products are used in laboratories of coal, petroleum, mineral, power, metallurgy, chemical, building materials, geology and other departments. XMQ 240 × 90 laboratory conical ball mill is available for you to provide.

　　1、 Structural analysis of XMQ 240 × 90 laboratory conical ball mill:

　　The grinding method of the conical ball (rod) mill has also been greatly improved compared to ordinary ball mills. Due to the conical shape of the discharge end of the cylinder, for each longitudinal section, the medium ball and material move downward along the conical surface under the action of gravity W1 and centrifugal force F1. The larger the particle size of the medium ball and material, the greater the trend of downward movement.

　　2、 XMQ 240 × 90 laboratory conical ball mill parameters:

　　Specification: 240 × 90

　　Capacity: 6.25L

　　Grinding capacity: 2500g

　　Cylinder rotation speed: 96r/min

　　Feed particle size: ＜ 3mm

　　Product particle size: 0.074mm

　　Motor power: 0.75kw

　　Dimensions: 770 * 640 * 1300mm

　　Weight: 170kg

　　3、 XMQ 240 × 90 Laboratory Cone Ball Mill Operation and Maintenance:

　　1. Grip the upper handle tightly with your hand and apply appropriate force to rotate the entire grinding drum and frame 90 degrees, and raise the feeding port of the grinding drum upwards

　　2. Open the feeding cover with a dedicated wrench and add the material into the grinding cylinder. Cover the cover and tighten it with a wrench to rotate the grinding cylinder to a horizontal position. Release the handle and insert the positioning pin into the positioning slot.

　　3. Turn on the high-speed train and turn it off after a certain amount of time has passed. Align the bolt at the discharge port with a special wrench and unscrew it, then place the receiving tray on the bracket.

　　4. Hold the handle tightly with your hand to move the pin away from the positioning slot, slowly rotate the discharge port of the grinding cylinder and the whole machine downwards, and pour out the ground sample into the receiving tray.

　　5. Open the feeding port and clean the grinding cylinder with clean water to make the cylinder clean.

　　6. Close the discharge port tightly, add materials, and repeat the previous operation.

　　7. If not in use for a period of time, lime water should be added to the grinding cylinder and the lid should be closed to protect the inner wall of the cylinder and the steel rod from rusting.

　　8. Before each use, please add engine oil to the oil cup on the bearing seat before starting the machine. This can protect the copper sleeve from wear and tear.

　　The conical ball mill used in the laboratory is produced and sold by Tai'an Yucheng. The product specifications include 150 × 50, 150 × 100, 240 × 90, 360 × 160, etc. The quality is guaranteed, and the product has a one-year warranty. If you encounter any problems during use, you can contact us. Our technical personnel will guide you, and after-sales service is guaranteed. You can rest assured to purchase.

AfterSalesService :

• tapered ball mill