ZBQ-25/5 Mining Pneumatic Grouting Pump Parameters 200L Pneumatic Mixing Bucket

Description :

　　ZBQ-25/5Parameters of Mining Pneumatic Grouting Pump200LPneumatic mixing drum

　　ZBQ-25/5Mining pneumatic grouting pump, ZBQModel of pneumatic grouting pump,ZBQ-25/5Parameters of mine pneumatic grouting pump,200LPneumatic mixing drum

　　1、 Characteristics of ZBQ-25/5 Mining Pneumatic Grouting Pump:

　　1. The ZBQ-25/5 mining pneumatic grouting pump has a small volume, light weight, and is easy to move and transport, suitable for multi-point grouting with frequent movement.

　　2. Due to the use of pneumatic transmission, the grouting performance of the pump is very suitable for working conditions where high flow is required when the grouting pressure is low, and low flow is required when the grouting pressure increases.

　　3. Due to the use of pneumatic transmission, it can also be used in flammable, highly explosive, water dripping, dusty and other working environments.

　　4. Under conditions where the slurry ratio requirement is not very strict, dual fluid injection can be achieved with just one pump, greatly reducing the cost of purchasing construction equipment.

　　5. Automatic variable, pressure limiting and holding.

　　6. A low impulse, high thrust pneumatic reciprocating pump that can pour slurry, thick slurry, and large particle slurry.

　　7. Can be used in rainy and high gas environments.

　　2、 Technical parameters of ZBQ-25/5 mining pneumatic grouting pump:

　　Gas supply pressure: 0.2-0.63 Mpa

　　Grouting pressure: 0-10 Mpa

　　Grouting flow rate: 0-40 L/min

　　Gas consumption: ≤ 2m3/min

　　Weight: 18kg

　　Dimensions: 285 * 200 * 1060mm

　　Mixing bucket capacity: 80L

　　3、 Function of ZBQ-25/5 Mine Pneumatic Grouting Pump:

　　The ZBQ-25/5 mining pneumatic grouting pump is a new generation grouting equipment in our factory, mainly used in mining, tunnel, water conservancy, subway, construction, and bridge construction. It is used for grouting water blocking, filling gaps, grouting consolidation of fractured rock layers, and anchoring grouting; It is also used for repairing local defects such as road and railway subgrade frost heave, as well as soft foundation treatment.

　　4、 Maintenance of ZBQ-25/5 Mine Pneumatic Grouting Pump:

　　1. Timely and correct lubrication can ensure the normal operation of the pneumatic pump and minimize the wear of moving parts;

　　2. Lubricating oil should be added to the oil cup of the oil mist device once per shift, using No. 20 engine oil, and there should be no dust or other impurities in the oil. The oil mist regulator valve core can be slightly opened (after tightening, open it about one-third of a turn). When cleaning and maintaining the oil mist device, attention should be paid to the assembly direction of the oil mist valve seat, and the oil mist output small hole should face the output port;

　　Tai'an Yucheng Mining Equipment Co., Ltd. manufactures mining pump products. The ZBQ series grouting pump is widely used in coal mines, and there are also many models available. Tai'an Yucheng has a complete range of models: ZBQ-5/12 Tongcheng Mining Pneumatic Grouting Pump, ZBQ-15/5 Mining Pneumatic Grouting Pump, ZBQ27/1.5 Mining Pneumatic Grouting Pump, ZBQ-25/5 Mining Pneumatic Grouting Pump; ZBQ-8/10 Mining Pneumatic Grouting Pump; ZBQS-12/10 Mining Pneumatic Double Liquid Grouting Pump, ZBQS-12/8 Mining Pneumatic Double Liquid Grouting Pump, 2ZBQS Coal Mine Pneumatic Double Liquid Grouting Pump, 2ZBQ, ZBQ12/10 Pneumatic Double Liquid Grouting Pump, ZBQ-8/7 Mining Pneumatic Grouting Pump. You can choose the model you need according to the technical parameters of each pump.

AfterSalesService :

• Parameters of Mining Pneumatic Grouting Pump