Sales of XMQ360 * 160 cone ball mill for both dry and wet use

Description :

　　Wet and dry dual-use ball mill XMQ360×160Cone ball mill sales

　　XMQ360×160Cone ball mill, wet dry dual-use ball mill, wet dry dual-use cone ball mill, laboratory ball mill, small laboratory ball mill

　　The XMQ360 × 160 conical ball mill is an essential equipment for mineral analysis and fine grinding of ores in laboratory laboratories of metallurgy, geology, coalification, building materials and other departments; It is also a device used in conjunction with flotation machines and other instruments.

　　XMQ360×160Instructions for using a conical ball mill：

　　1. The steel balls have been proportioned before leaving the factory and cannot be changed by the user at will;

　　2. First, let it run by air to clean the steel balls and cylinder walls thoroughly;

　　3. Before adding materials, grip the handle tightly and rotate the cylinder and frame 90 °, with the feeding port facing upwards. Release the locking position of the handle, open the feeding port with a wrench, and cover the feeding ports with water, ore, and chemicals in sequence. After releasing the handle and rotating it 90 °, lock it and work according to the predetermined time.

　　4. When retrieving materials, wait for the motor to stop running, place the material receiving basin, open the discharge port with a wrench, release the positioning with the handle, and rotate the cylinder discharge port downward by 90 ° to overflow the slurry. After cleaning, it can be restarted.

　　XMQ360×160Introduction to parameters of conical ball mill：

　　Specification: 360 × 160

　　Capacity: 11.25L

　　Grinding capacity: 4000g

　　Cylinder rotation speed: 90r/min

　　Feed particle size:<-3mm

　　Product particle size: -0.074mm

　　Motor power: 1.1kw

　　Dimensions: 800 * 700 * 1190mm

　　Weight: 300kg

　　XMQ360×160Installation of conical ball mill：

　　Power supply: 380V

　　Foundation: Fix the bracket feet onto the cement base with expansion screws.

　　Trial rotation: If the direction of rotation is consistent with the mark, it is normal.

　　XMQ360×160Daily maintenance of conical ball mill:

　　1. Clean after use;

　　2. For intermittent use, lime water should be added to the cylinder when the equipment is not in use;

　　3. Add an appropriate amount of butter to the oil cup of the front bearing seat before use;

　　4. Regularly check the power supply voltage and grounding to ensure good condition.

　　Our company has always adhered to honest management and won the trust and support of our customers with the principles of excellent quality and good service over the long term. Tai'an Yucheng sincerely invites your cooperation. XMQ360 × 160 cone ball mill quality assurance, with relevant certificates such as certificate of conformity and instruction manual provided at the factory.

AfterSalesService :

• Wet and dry dual-use ball mill