Yucheng brand ZBQ-8/10 pneumatic grouting pump coal safety complete pneumatic single cylinder grouting pump

Description :

　　ZBQ-8/7Grouting pump with 100L capacitymixing tank Mining pneumatic grouting pump

　　ZBQ-8/7Grouting pump, grouting pump 100LMixing bucket, mining pneumatic grouting pump, mining ZBQgrouting pump

　　One ZBQ-8/7Parameters of grouting pump:

　　1. Environmental temperature: 0 ℃~45 ℃;

　　2. Relative humidity not exceeding 95% (at+25 ℃);

　　3. Coal mine underground with a mixture of methane and air;

　　4. Construction site: Drilling and sealing holes underground in coal mines, filling the roof space of the working face, and quickly building sealed walls.

　　twoTheZBQ-8/7Characteristics of grouting pump:

　　1. Pre mixed concrete and pumping technology are important ways to achieve construction industrialization, mechanization, and production. They have changed the traditional small-scale production method of dispersed mixing on site and can solve the problems of narrow construction sites and difficult material stacking.

　　2. The degree of mechanized construction is relatively high, which reduces labor intensity.

　　3. Hydraulic dual cylinder piston reciprocating conveying.

　　4. The swing resistance of the straight pipe distribution valve is small, and it switches quickly to continuously spray wet concrete without interruption

　　III ZBQ-8/7Operating procedures for grouting pump:

　　1. Ensure that the gas source is free of excessive moisture and dirt, and ensure the lubrication system of the gas source oil. Optional oil mist generator provided by our factory.

　　2. The air source pipe should first be connected to the ventilation pipe to blow away debris, and then reliably connected to the grouting pump.

　　3. Firstly, immerse the inlet of ZBQ-8/7 grouting pump into clean water, slowly open the inlet ball valve, and ensure that the grouting pipeline is unobstructed and the seal is in a leak free state.

　　4. The slurry should be mixed evenly, without lumps, but thick. Timely clean the solidified materials at the corners and edges of the bucket to prevent them from being mixed into the slurry.

　　5. Immerse the inlet of ZBQ-8/7 grouting pump into the slurry, slowly open the inlet ball valve, and gradually increase to the appropriate grouting speed.

　　4 ZBQ-8/7Safety precautions for grouting pumps:

　　1. When the ZBQ-8/7 slurry pump is working, attention should be paid to observing the condition of the top plate to prevent sudden local collapse of the top plate or the falling of crushed stones from injuring the operator

　　2. The ZBQ-8/7 grouting pump should be slowly started, and the pneumatic valve should be adjusted. It is strictly prohibited to start the pneumatic pump suddenly and rashly to avoid causing accidents.

　　3. When using ZBQ-8/7 grouting pump, it should not exceed the rated value, and attention should be paid to the reliable connection of the output pipeline to avoid causing accidents

　　Time never speaks, yet it answers all the questions. Let time prove the quality of Tai'an Yucheng ZBQ-8/7 grouting pump.

AfterSalesService :

• Pneumatic grouting pump coal safety