CP180 * 150 laboratory hammer crusher factory direct sales

Description :

　　CP180×150Laboratory hammer crusher

　　CP180×150Hammer crusher, laboratory hammer crusher, small hammer crusher direct sales, laboratory hammer crusher manufacturer

　　The specifications of the hammer crusher used in Yucheng Laboratory include 250 * 360180 * 150300 * 200, etc. You can choose according to your actual needs. Let's get to know the CP180 × 150 laboratory hammer crusher together.

　　CP180×150Introduction to laboratory hammer crusher:

　　The laboratory hammer crusher is a crusher used for laboratory sample preparation, which directly crushes materials with a particle size of 50-150 millimeters to below 1, 3, 6, and 13 millimeters. The laboratory hammer crusher is mainly used for coarse, medium, and fine crushing of raw materials. Various materials that need to be crushed, such as coal, coke, limestone, pyrite, phosphate ore, coal gangue, etc. Its crushing method is the splitting crushing method. The block size of the crushed material should be 10-60 millimeters smaller than the size of the material mouth of the selected machine model, and the specific size should refer to the technical parameter table. The compressive strength of the crushed material is ≤ 800MPa. Crushed stones are commonly used in the construction industry and highway construction. It is also widely used in the metallurgical industry, building materials industry, and mining industry.

　　CP180×150Parameters of laboratory hammer crusher:

　　CP180×150Precautions for using laboratory hammer crusher:

　　To ensure long-term good use of the machine, calcium based grease should be regularly added to each moving mechanism and bearing, and each bearing should be refilled every 60 days.

　　After the crusher is started and the operating speed reaches normal speed, feeding can be done. For machines without hoppers, feeding should be added from the front, not from the side, to prevent accidents caused by machine overload. And strictly prevent steel and ultra hard rocks from entering the machine to avoid damaging the parts. A small hammer crusher is used for feeding, and the feeding amount is controlled by manually controlling the gate.

　　The laboratory hammer crusher has a small volume, light weight, simple structure, easy operation and maintenance, safety, and convenience. At the same time, the machine also has a high crushing ratio and uniform product particle size, which is suitable for departments such as metallurgy, electricity, coal, mining, chemical industry, environmental protection, and scientific research.

AfterSalesService :

• Laboratory hammer crusher