EPS-1/8 Jaw type Crushing and Shrinking Machine Manufacturer Direct Sales

Description :

　　EPS-1/8Crushing and shrinking machine Jaw type crushing and shrinking machine

　　Jaw type crushing and shrinking machine,EPS-1/8Jaw type crushing and shrinking machine, manufacturer of jaw type crushing and shrinking machine, direct sales of jaw type crushing and shrinking machine

　　The Yucheng EPS-1/8 jaw type crushing and shrinking machine is designed with full sealing, no dust pollution, and meets environmental protection requirements. The product runs smoothly and has low noise. High quality crushing and shrinking machines are available for you.

　　1、 Introduction to EPS-1/8 Jaw Crushing and Shrinking Machine:

　　Mainly used in industries such as coal, electricity, metallurgy, carbon, geology, etc., it can also be used for material crushing and reduction in other industries for sample preparation. The overall design of the machine is reasonable, the structure is compact, and the service life is long; The operation, maintenance, and cleaning are all very convenient. And it increases the separation of coarse and fine raw materials, with fast sample preparation speed and high production efficiency. Especially different from the current market of the same type, it has added a sealing function, no dust leakage, stable performance, low noise, and improved the working environment and conditions of sample preparation. It is an ideal equipment for upgrading and replacing laboratory sample preparation equipment.

　　2、 EPS-1/8 Jaw Crushing and Shrinking Machine Performance Parameters:

　　Model: EPS-1/8

　　Feed particle size:<50 millimeters

　　Discharge particle size: adjustable from 1-8 millimeters

　　Production capacity: 0.1-0.5 T

　　Shrinkage ratio: 1/8

　　Spindle speed: 480r/min

　　Input power: 1.5KW

　　Voltage: 380V

　　Dimensions: 1150x600x1200

　　3、 Performance characteristics of EPS-1/8 jaw crushing and shrinking machine:

　　1. The crushing system of this machine adopts the principle of curved extrusion crushing. Relying on two wear-resistant jaw plates to crush the material. Broken objects

　　2. The material should be brittle, and the shape of the crushed material is mostly in the form of flakes. The particle size of the crushed material should be 10-20 millimeters smaller than the feed inlet

　　3. Crushing mechanism: After starting the electric motor, the crankshaft rotates through a V-belt, and the movable jaw connected to the shaft swings. The movable and static jaw plates crush the material to achieve the purpose of crushing. In order to increase the crushing force and inertia, a flywheel is installed at the other end of the shaft. The crushed material enters the reduction mechanism.

　　4. Splitting mechanism: The splitting system consists of a quarterer and a bipartite, with the quarterer performing horizontal reciprocating motion to cut materials. The slots of the splitter discharge in two directions, further dividing the cut material into two parts, with one part collected and the other discarded. The machine is designed with a 1/8 splitting ratio.

　　The jaw crushing and shrinking machine integrates jaw crushing and shrinking, and all functions are carried out under sealed conditions without dust pollution, ensuring the physical and mental health of workers and reducing their labor intensity. Mainly used in departments such as coal, electricity, metallurgy, chemical industry, environmental protection, geology, and scientific research.

AfterSalesService :

• Crushing and shrinking machine