Mining Dispatch Winch 1.6-ton Product Introduction 25kw Dispatch Winch

Description :

　　Mining scheduling winchone point sixIntroduction to tonnage products 25kwDispatch winch

　　Mining scheduling winchJD-1.6Mining scheduling winchone point sixTon,one point sixTon scheduling winch,25kwDispatch winch

　　Yucheng Mining Equipment Co., Ltd. is located at the foot of the beautiful Mount Taishan Mountain in Tai'an City, Shandong Province. We have our own production plant and technical team. We have sufficient inventory and fast shipment. The electrical equipment of the dispatching winch we produce has explosion-proof performance. It is the product of the Safety Mark Certificate for Mining Products within the validity period, mainly used in coal dust and gas mines. Good explosion-proof performance, can be used with confidence.

　　Mining scheduling winchone point sixtonStructure description:

　　Mining scheduling winchone point sixtonIt consists of components such as electric motor, gear and transmission device, drum device, brake, working brake, base, etc.

　　As shown in the picture:

　　Mining scheduling winchone point sixtonOperation requirements

　　1Mining scheduling winchone point sixtonDrivers must undergo training and pass the exam before being certified to work.

　　2Mining scheduling winchone point sixtonDrivers must be proficient in the "structure, performance, and basic principles" of winches, and be able to "use, maintain, upkeep, and handle general faults".

　　3. The winch driver must be familiar with the length, slope, variable slope section, intermediate level yard, track condition, safety facility configuration, signal contact information, and the required number of towing vehicles of the inclined lane.

　　4Mining scheduling winchone point sixtonDrivers must strictly comply with the regulations of 'no one is allowed to drive while driving, and pedestrians are not allowed to drive'.

　　5. The winch driver must strictly follow the signal instructions when driving, and must not drive without clear signals.

　　6. Signal regulations: (1) One point parking; (2) Pull the car at two points; (3) Release the car at three o'clock; (4) Slow down at four o'clock; (5) Slow down at five o'clock.

　　Mining scheduling winchone point sixtonWorking Principle:

　　The motor gear is connected to the shaft gear, and the shaft gear drives the three small planetary gears on the small gear frame to rotate. The small planetary gear meshes with the small internal gear, and the three small planetary gears not only rotate on their own, but also revolve around the shaft gear, which drives the small gear frame to rotate. The small gear frame is connected to the double gear, which rotates the double gear and drives the large planetary gear to rotate;

　　At this point, there are three possible states:

　　If the left brake stops the drum and the right brake is released, the large internal gear does not rotate because it is connected to the drum. The large planetary gear not only rotates itself, but also revolves, and the right brake wheel rotates through the large gear frame. The heavy object is stopped in a certain position due to the drum being stationary, which is the stopped state.

　　If the left brake is released and the right brake is applied to the brake wheel, the large planetary wheel will only rotate on its own, and the drum will be driven to rotate through the large internal gear for traction. This is called the working state. If the motor is turned on to reverse, it is called the working down state. When starting and stopping, as well as adjusting the drum speed during heavy object lowering, two brake devices can be used to alternately brake and release for adjustment.

AfterSalesService :

• Mining scheduling winch