5-ton mining return column winch Yucheng wholesale return column winch JH-5

Description :

　　miningfiveTon return column winch Yucheng wholesale Return column winchJH-5

　　miningfiveTon return column winch, miningfiveManufacturer of ton return column winch,JH-5Return column winch, return column winch, Yucheng return column winch,fiveTon return column winch

　　1、 Basic parameters of JH-5 column winch:

　　Specification and model: JH-5 type

　　Roll: Diameter X Width: 260X272MM Rope Capacity: 80M

　　Steel wire rope: diameter: 15.5mm, average rope speed: 0.11m/s

　　Load: Average static tensile force of 50KN

　　Total transmission ratio: 149.09

　　Supporting motor: Power 7.5KW Speed: 970r/min Model: YB2-160M-6 Voltage

　　Dimensions: 1720X548X570mm

　　Host weight: 650kg

　　Supporting motor equipment: QBZ-80N mining explosion-proof (vacuum) electromagnetic starter or magnetic starter

　　2、 JH-5 column winch model representation

　　3、 Use environment and working conditions

　　(1) The ambient temperature is -10 ° C~+40 ° C, and the relative humidity does not exceed 95% (+25 ° C). The altitude is below 2000 meters.

　　(2) Methane, coal dust, hydrogen sulfide, and carbon dioxide in the surrounding air are strictly prohibited from exceeding the safe levels specified in the Coal Mine Safety Regulations.

　　(3) The working system of the winch is a low-speed heavy load discontinuous type.

　　4、 Lubrication of JH-5 column winch

　　The lubrication of a machine is not only related to its normal operation, but also directly affects its lifespan, so it is necessary to replace and replenish lubricating oil in a timely manner. The material of lubricating oil must meet the requirements and must not be mixed with impurities such as dust, dirt, iron filings, and water.;

　　In order to lubricate the worm gear and rolling bearings inside the worm gear box, 24 cylinder oil is injected into the worm gear box, so that the oil level is frequently immersed in the lower teeth of the worm gear, and it is checked once a day and replenished in a timely manner. The oil quality of the worm gear box must not be changed arbitrarily, otherwise it will cause a sharp increase in oil temperature inside the box, exacerbate worm gear wear, and reduce transmission efficiency.

　　Small gears, bridge gears, and large gears should also be lubricated with the above oil quality. Oil should be added at least once per shift to maintain a layer of oil film between the tooth surfaces.

　　Yucheng Mining Equipment Co., Ltd. is located at the foot of the beautiful Mount Taishan Mountain in Tai'an City, Shandong Province. We have our own production plant, technical team, sufficient inventory and fast shipment. You will not regret it.

AfterSalesService :

• 5-ton mining return column winch