Price of KCS-410D Mining Wet Dust Removal Fan

Description :

　　ShanxiMining wet dust removal fanKCS-410Dsell

　　KCS-410DDust removal fan, Shanxi mining dust removal fan, wet dust removal fan,KCS-410DDust removal fan for sale

　　Under the heavy pressure of environmental protection, the environmental protection of coal mining enterprises is also of paramount importance. The large amount of coal dust generated in coal mine production cannot be ignored. Directly spraying mist water can cause chaos in the mine area, so a good dust removal fan is essential. Yu provides you with a user-friendly dust removal fan KCS-410D.

　　1、 Introduction to KCS-410D dust removal fan:

　　The KCS-410D dust removal fan is a wet dust removal fan specifically designed for underground coal mines. It is composed of a coal mine explosion-proof extraction type local ventilation fan (hereinafter referred to as the fan) and a wet screw string dust collector (hereinafter referred to as the dust collector). The installed fan is an axial flow explosion-proof extraction type local ventilation fan. As long as the working point design of the dust collector matches the resistance characteristics of the fan, the overall performance of the machine can be guaranteed to meet the design indicators and environmental acceptance standards.

　　2、 Performance parameters of KCS-410D dust removal fan:

　　Working pressure 1200Pa

　　Processing air volume 410m3/min

　　Total dust removal efficiency% 90~98

　　Respiratory dust efficiency ≥ 65

　　Liquid gas ratio L/m3 ≤ 0.2

　　Noise dB ≤ 85

　　electric motor

　　380V/660V

　　660V/1140V model YBK2-200L2-2

　　Rated speed r/min 2940

　　Power KW 37

　　Overall dimensions: length x width x height mm 3180 x 950 x 1200

　　Whole machine weight 1126

　　Long term work style

　　Adapt to environments above 0 ℃

　　3、 Composition of KCS-410D dust removal fan:

　　The wet dust removal fan for mining mainly consists of impeller, casing, air inlet and other parts matched with a direct connected motor. In addition to the above parts, the dust removal fan also has a transmission part.

　　1. Impeller: It consists of 12 backward sloping wing shaped blades welded to the middle of a conical wheel cover and a flat plate. All are made of steel plates and have undergone static and dynamic balance correction, with good air performance, high efficiency, and smooth operation.

　　2. Shell: The shell is a snail shaped body welded from ordinary steel plates, and is made in two different types. The dust removal fan shell is made as a whole and cannot be disassembled. The casing of the dust removal fan is made into a three open type, which is divided into two halves along the horizontal plane, and the upper half is further divided into two halves along the vertical centerline, connected by bolts.

　　3. Air inlet: Made into a convergent streamlined overall structure, fixed on the inlet side of the fan with bolts.

　　4. Transmission group: composed of main shaft, bearing box, rolling bearings, pulleys or couplings, etc. The spindle is made of steel

　　The KCS-410D dust removal fan from Yucheng Mining has complete certification and good dust removal effect, which is deeply loved by the coal mining industry. Taianyu has become a health protector for workers.

AfterSalesService :

• KCS410D dust removal fan