Pneumatic leg type anchor drilling rig MQTB-60/1.5 runs stably

Description :

　　Pneumatic leg type anchor drilling rigMQTB-60/1.5Stable operation

　　MQTB-60/1.5Pneumatic leg type anchor drilling rig, pneumatic leg type anchor drilling rig,MQTB-60/1.5The price of pneumatic leg type anchor drilling rig

　　Tai'an Yucheng Mining Equipment Co., Ltd. produces and sells MQTB-60/1.5 pneumatic support leg anchor drilling rig; MQTB-80/2.4 Pneumatic Leg type Anchor Rod Drilling Machine for Coal Mines; MQTB-120/2.5 pneumatic leg type anchor drilling rig; MQTB-130/2.8 Pneumatic Leg type Anchor Rod Drilling Machine for Coal Mines; MQTB-85/2.0 Pneumatic Leg type Anchor Rod Drilling Machine for Coal Mines; MQTB-80 coal mine pneumatic support leg anchor drilling rig and other models of support leg anchor drilling rig have been sold to major coal mines in Shanxi, Shaanxi, Guizhou, Inner Mongolia, Gansu, Sichuan, Hunan, Hubei and other provinces, and have been widely recognized. We look forward to your inquiry.

　　1、 MQTB-60/1.5 Pneumatic Leg Anchor Drilling Machine Introduction:

　　The MQTB-60/1.5 pneumatic support leg anchor bolt drilling rig is developed based on the comprehensive development of multiple domestic and foreign pneumatic anchor bolt drilling rigs to meet the promotion of coal mine roadway anchor bolt support technology. Suitable for drilling anchor holes in coal tunnels and installing anchor rods and cables. You can drill coal support holes or roof holes. It has the advantages of being versatile, easy to operate, and easy to maintain.

　　2、 Characteristics of MQTB-60/1.5 Pneumatic Leg type Anchor Rod Drilling Machine:

　　This product has a small volume, light weight, simple operation, and easy maintenance. When the motor starts, it can stabilize at the set point. Gear type pneumatic motor, stable operation, high reliability. The new fiberglass air leg design is safe, explosion-proof, and has a longer service life.

　　3、 MQTB-60/1.5 Pneumatic Leg Anchor Drilling Machine Parameters:

　　4、 MQTB-60/1.5 Pneumatic Leg Anchor Drilling Machine Operation Method:

　　1. Use your right hand to move the rotary knob and connect the flushing water circuit.

　　2. Use your left hand to gradually rotate the control knob towards the "open" position and extend your air leg. When rotated to the "closed" position, the air leg retracts by descending under its own weight (note: when descending, the drilling rig descends quickly, and attention should be paid to standing firm, stabilizing the drilling rig, and preventing the drill rod from falling off).

　　3. The rotation of the drilling rig is controlled by a handle switch, and the more pressure is applied, the faster the rotation speed of the drilling rig; Release the switch to automatically stop rotating and reset to the closed position.

　　Pneumatic leg type anchor drilling rig is coming to Yucheng, looking forward to your purchase.

AfterSalesService :

• Pneumatic leg type anchor drilling rig