JDPP30-30MS plastic mesh with false top and good flame retardancy for mining plastic mesh

Description :

　　JDPP30-30MSPlastic mesh with fake roof and good flame retardancy. Mining plastic mesh

　　JDPP30-30MSPlastic mesh fake top mesh, JDPP plastic mesh fake top mesh, mining plastic mesh, flame-retardant plastic mesh fake top

　　Where is the false roof of the JDPP30-30MS bi-directional tensile plastic mesh used underground in coal mines? At Shandong Yucheng Mining Equipment Co., Ltd., I'd like to take you to know your company first. Tai'an Yucheng Mining Equipment Co., Ltd., founded in 2015, is located in the well-known Mount Taishan Youth Entrepreneurship Development Zone at the foot of Mount Taishan Mountain, close to Beijing Fuzhou, Beijing Shanghai Expressway and Beijing Shanghai High speed Railway. With convenient transportation, it extends in all directions, gathering the beautiful natural scenery of Mount Taishan Mountain and strong Qilu cultural heritage. The company is a private enterprise mainly engaged in the design, development, production, and sales of large and small equipment for coal mines. Its products have been widely used in more than 100 coal mines in ten major mining areas, including Shenhua Group, Yanzhou Coal Industry, Datong Mining, Zao Mining Group, Xinwen Mining Group, Yongmei Group, Coking Coal Group, Pingdingshan Coal Mining Group, Jingyuan Coal Industry, etc., and have achieved important results.

　　1、 Advantages of JDPP30-30MS Plastic Mesh False Top Mesh Technology:

　　1. Friction does not easily generate static electricity. In the underground environment of coal mines, the average surface resistance of plastic mesh is below 1 × 109 Ω.

　　2. Good flame retardant performance. Can achieve the flame retardant performance specified in industry standards MT141-2005 and MT113-1995 respectively.

　　3. Easy to wash coal. The density of plastic mesh is around 0.92, which is lower than the density of water. During coal washing, broken mesh floats on the water surface and is easily washed away.

　　4. Strong corrosion resistance and aging resistance.

　　2、 JDPP30-30MS Plastic Mesh False Top Mesh Parameters:

　　jdpp15-15ms、jdpp20-20ms、 jdpp25-25ms、jdpp30-30ms（

　　3、 JDPP30-30MS Plastic Mesh False Top Mesh Preparation Instructions:

　　JD is a false roof, made of PP polypropylene, MS flame retardant and anti-static, with a bearing strength of 3 tons per square meter for 30-30 degrees.

　　4、 JDPP30-30MS Plastic Mesh False Top Mesh Formation Principle:

　　Plastic raw materials are heated and melted in an extruder, and then extruded through a screw into a special rotating head with several small holes in the inner and outer mold mouths. Molten plastic flows through the pores of the mold to form two strands of molten material fibers. Due to the rotation of the machine head, the two strands of material intermittently converge at one point, forming a network, which is then cooled and shaped into a network.

　　5、 JDPP30-30MS Plastic Mesh False Top Mesh Internet Connection Specific Operation Method:

　　(1) After the fiber mesh enters the working face, the first step is to confirm whether the direction of the mesh is correct and whether the mesh is twisted after unfolding. Then, use a blade to cut off the ropes of the fiber mesh.

　　(2) After unfolding the mesh, use the steel wire rope on the manual winch to pass through the steel wire rope on the working face, hook up the edge of the mesh, shake the winch, lift the fiber mesh edge, and connect it with the steel wire rope on the working face with a networked wire.

　　This product is a matrix made of high-strength and low shrinkage polyester fibers bundled and woven, coated with a special surface coating, and then processed. Easy to construct, low cost, safe and beautiful. Its main characteristics are that friction does not easily generate static electricity, it has good flame retardant performance, strong anti-corrosion ability, but it has strong load-bearing capacity in construction, transportation, longitudinal and transverse directions.

AfterSalesService :

• Plastic mesh fake top mesh sheet