Production of MQTB-80 Pneumatic Leg type Anchor Rod Drilling Machine for Coal Mines
Category:
metallurgy/Mining construction equipment/Drilling and production equipment
Model:
MQTB-80
Brand:
Tai'an Yucheng
Retail Price
1,000.00USD
重量
kg
- Product Description
-
Description :
Used in coal minesMQTB-80Pneumatic leg type anchor drilling rig coal safety certification
MQTB-80Pneumatic leg type anchor drilling rig for coal mines,MQTBSeries pneumatic leg type anchor drilling rig, pneumatic leg type anchor drilling rig supply
1、 MQTB-80 pneumatic support leg anchor drilling rig for coal mines, applicable scope:
Suitable for coal roadway and semi coal roadway anchor support operations with rock hardness ≤ f8. It can drill anchor bolt holes and anchor bolt holes, as well as mix and install resin coated anchor bolts and anchors. No other equipment is required to achieve one-time installation and tightening of anchor bolts and nuts, meeting the requirements of initial anchor pre tightening force.
2、 The MQTB-80 pneumatic support leg anchor bolt drilling rig for coal mines is developed based on the comprehensive development of multiple domestic and foreign pneumatic anchor bolt drilling rigs to meet the promotion of coal mine roadway anchor bolt support technology. Suitable for drilling anchor holes in coal tunnels and installing anchor rods and cables. You can drill coal support holes or roof holes. It has the advantages of being versatile, easy to operate, and easy to maintain.
3、 MQTB-80 coal mine pneumatic support leg anchor drilling rig parameters:
Working pressure
Mpa
0.4-0.63
rated pressure
Mpa
zero point five
rated speed
r/min
two hundred and forty
rated torque
N.m
eighty
stall torque
N.m
one hundred and eighty-five
no-load speed
r/min
≥ 600
air consumption
m3/min
four
*High thrust
KN
four
Rinse water pressure
Mpa
0.6-1.2
noise
dB(A)
≤ 95
Whole machine * large height
mm
3170±50
Whole machine * small height
mm
1165±50
Total weight
Kg
forty-six
The MQTB-80 pneumatic support leg anchor drilling rig for coal mines includes similar products such as:
MQTB-60/1.5 Pneumatic Leg type Anchor Rod Drilling Machine
MQTB-80/2.4 Pneumatic Support Leg Anchor Rod Drilling Machine for Coal Mines
MQTB-120/2.5 Pneumatic Leg Anchor Drilling Machine
MQTB-130/2.8 Pneumatic Support Leg Anchor Rod Drilling Machine for Coal Mines
MQTB-85/2.0 Pneumatic Support Leg Anchor Rod Drilling Machine for Coal Mines
MQT-120/2.8 Pneumatic Anchor Rod Drilling Machine for Coal Mines
MQT-130/3.2 Coal Mine Gas Handheld Drilling Machine
MQT-120/2.2 Pneumatic Anchor Rod Drilling Machine for Coal Mines
MQT-130/3.0 Pneumatic Anchor Rod Drilling Machine for Coal Mines
MQT-110/2.4 Coal Mine Gas Handheld Drilling Machine
The Yucheng Mining Pneumatic Leg type Anchor Rod Drilling Machine comes with relevant certificates such as coal safety certificate, qualification certificate, and testing certificate when it leaves the factory, so you can purchase and use it with confidence.
AfterSalesService :
Key words:- Production of Pneumatic Leg type Anchor Rod Drilling Machine
