Tai'an Yucheng direct sales YN27C internal combustion rock drill with large quantity and competitive price

Description :

　　Tai'an Yucheng direct sales YN27C internal combustion rock drill with large quantity and competitive price

　　YN27C Internal Combustion Rock Drill, YN27C Internal Combustion Rock Drill Manufacturer, Internal Combustion Rock Drill, Large Quantity and Affordable Internal Combustion Rock Drill

　　Technical parameters of YN27C internal combustion rock drill:

　　Model YN27C

　　Product alias: Internal Combustion Rock Drill

　　Host weight 27 kg

　　Engine displacement 185cm3

　　Engine load speed ≥ 2450 r/min

　　Idle speed of drill rod ≥ 200 r/min

　　Drill shank size, drill rod tail hexagonal 22x108 mm

　　*Deep drilling depth ≥ 6 meters

　　Fuel tank capacity ≥ 1.14 L

　　Drilling speed ≥ 250mm/min

　　Spark plug electrode gap 0.5-0.7 mm

　　Fuel consumption rate ≤ 0.12L/m

　　Impact energy ≥ 20J

　　Drilling diameter 26-46 (mm)

　　Drilling depth ≥ 6 (m)

　　Characteristics of YN27C Internal Combustion Rock Drill:

　　1. There is no need to replace the internal parts of the machine head, just move the handle as required to start the operation. This machine is easy to operate, saves time and effort, and has the characteristics of fast chiseling speed and high efficiency. Achieve the level of similar products and be able to fully exchange parts with international similar products.

　　2. Drill holes in rocks, with a vertical downward and horizontal upward angle of less than 45 ° and a vertical downward depth of up to six meters. The special host weighs only 27 kilograms and is easy to carry. The YN27C internal combustion rock drill is particularly suitable for high mountains, areas without power or wind pressure equipment, and temporary projects with high mobility. The YN27C internal combustion rock drill has a wide range of adaptability, whether working in high mountains, flat terrain, hot areas of 40 ° C, or extremely cold areas of minus 40 ° C.

　　The YN27C internal combustion rock drill produced by Tai'an Yucheng Mining Equipment Co., Ltd. has functions such as drilling, splitting, crushing, compacting, and shoveling. It can drill holes in rocks vertically and horizontally, with a depth of less than 45 meters. This rock drill is easy to carry and suitable for areas with high mountains, no power supply, and no wind pressure equipment. It is particularly suitable for temporary projects with high mobility and has a wide range of adaptability. The above is the basic introduction of YN27C internal combustion rock drill. If you want to know its price, specific model and other issues, you can contact our company to ensure good quality and low price.

AfterSalesService :

• YN27C internal combustion rock drill