Introduction to Malisan Gas Sealing Agent and Mining Sealing Materials

Description :

　　Introduction to Malisan Gas Sealing Agent and Mining Sealing Materials

　　Malisan gas sealing agent, Malisan sealing material, mining Malisan, mining sealing material, bagged Malisan sealing material

　　Malisan is a low viscosity, two-component synthetic polymer polyurethane material. When this product uses high-pressure injection for water blocking, when the resin and catalyst are mixed together, they react or expand when encountering water, resulting in their own reaction or foaming to form a multi-component network dense elastic material. The function of Malisan is to fill all gaps and achieve the goal of leak prevention. Malisan is a product with good performance in sealing materials, especially in water blocking materials.

　　1、 The scope of use of Malisan gas sealing agent:

　　Dense strata, rock reinforcement, anchor rod sealing, sealed water inlet, cracks, and unstable strata.

　　The ratio of Malisan resin to catalyst is 1:1 by volume and 1:1.17 by weight.

　　Malisan's construction equipment uses a small multifunctional pneumatic grouting pump and a dual liquid grouting system.

　　2、 Instructions for using Malisan gas sealing agent:

　　1. There is no need for slurry preparation on site. Simply connect components A and B to the grouting pump system, adjust the volume ratio to feed in a 1:1 ratio, and automatically mix through a static mixer to achieve grouting.

　　2. Before grouting, it is advisable to leave the two components at the corresponding ambient temperature for more than 12 hours. The on-site material temperature, environmental moisture, mixing conditions, etc. have a certain impact on the solidification time, rate, and strength of the slurry.

　　3、 Parameters of Malisan Gas Sealing Agent:

　　Reaction temperature (℃): ≤ 140

　　Termination foaming time (s): 50-20min

　　Foaming ratio: 8-40

　　Flame retardancy: non flammable

　　Surface resistance (Ω): ≤ 3 × 108

　　Dimensional stability (70 ℃± 2, 48h)% ≤ 0.1

　　Compressive strength and compressive strain 10%, kPa ≥200

　　4、 Characteristics of Malisan Gas Sealing Agent

　　1. Malisan gas sealing agent does not shrink after solidification

　　2. The sealing effect is stable and the sealing performance is high.

　　3. Malisan gas sealing agent can be pre packaged to meet different needs.

　　4. Manual operation, simple and fast.

　　5. Short sealing time and high efficiency.

　　Tai'an Yucheng produces a variety of mining chemical materials, including Malisan mining sealing and plugging materials, mining rock reinforcement materials, mining water blocking reinforcement materials, mining coal rock reinforcement materials, and Rokexiu mining composite filling materials; Organic mining filling materials, mining grouting and water blocking materials, coal seam roof reinforcement materials, coal mine gas blocking materials, coal mine roof caving grouting and water blocking materials, Malisan rapid spray sealing materials, polyurethane exterior wall insulation materials, and more. No matter which material you need, we can provide it. Welcome to come and purchase.

AfterSalesService :

• Malisan gas sealing agent