Coal mine electric heater RB-2000/127; A) Explosion proof and increased safety type

Description :

　　Explosion proof and safety enhancing electric heaters for coal minesRB-2000/127(A)sales

　　RB-2000/127(A)Electric heaters,RB-2000/127(A)Explosion proof and increased safety type heaters, mining explosion-proof electric heaters,two thousand and nineteenMining electric heater

　　Tai'an Yucheng Mining Equipment Co., Ltd. specializes in mining explosion-proof products. The company has been committed to bringing convenience to the coal mining industry for many years, providing safe and reliable products. The company's products are sold all over the country and have been unanimously recognized by customers, receiving their long-term support. The 2020 RB-2000/127 (A) coal mine explosion-proof and increased safety electric heater, Taian Yu, is available for you to provide.

　　1、 RB-2000/127 (A) Explosion proof and increased safety electric heaters for coal mines model representation:

　　2、 RB-2000/127 (A) Explosion proof and Safety increasing Electric Heater for Coal Mines Main Technical Parameters:

　　Rated power: 2000W;

　　Rated voltage: 127V;

　　Temperature controller * high surface temperature: not exceeding (80 ± 5) ℃

　　3、 RB-2000/127 (A) Coal Mine Explosion proof and Increased Safety Electric Heater Usage Conditions:

　　1. Environmental temperature: -20 ℃ to+40 ℃;

　　2. Relative humidity of the environment: ≤ 98% (+25 ℃);

　　3. Atmospheric pressure: 86kPa~106kPa;

　　According to Article 220 of the "Coal Mine Safety Regulations" (2004), when the ventilation room is located outside the industrial square, except for mines with gas emission areas and coal (rock) and gas outburst mines, flameproof furnaces or explosion-proof electric heaters can be used for heating.

　　4、 RB-2000/127 (A) Explosion proof and Safety increasing Electric Heater for Coal Mines Appearance and Structure:

　　1. The surface of the product should be smooth and flat, without pores or sand holes.

　　2. Metal components must undergo rust and corrosion prevention treatments such as galvanizing.

　　3. Fasteners must have measures to prevent automatic loosening.

　　4. The shell should have a grounding bolt not less than M8, and there should be an internal grounding terminal inside the shell. There must be a clear grounding symbol near the grounding bolt.

　　5. A protective cover should be installed on the top of the heater to prevent the accumulation of coal dust.

　　6. The heater must not produce sparks, arcs, or dangerous temperatures under normal operating conditions.

　　7. The material of the heater casing shall not produce cracks or explosions in unfavorable environments and conditions.

　　8. The explosion-proof gap at all explosion-proof joint surfaces on the heater shell shall not exceed the design requirements of the drawings.

　　Tai'an Yucheng Mining Equipment Co., Ltd. produces explosion-proof mining products, including explosion-proof water dispensers, explosion-proof electric heaters, explosion-proof electric heating warm air blowers, etc. There are many types of products with complete specifications, and as the weather gets colder, the demand for electric heaters increases. Company RB-2000/127 (A) supplies explosion-proof electric heaters for coal mines on a first come, first served basis.

AfterSalesService :

• Coal mine electric heater