Selling belt middle sampling machine, coal conveyor belt sampling machine

Description :

　　Selling belt middle sampling machine Coal conveyor belt sampling machine

　　Belt middle sampler, belt middle sampler, belt middle sampler manufacturer, belt automatic sampler

　　1、 What is a belt middle sampling machine:

　　The belt middle sampling machine is a fast, simple, reliable, and economical sampling device that directly collects materials from the moving conveyor belt. It can be used as a standalone sampling machine or as a primary sampling machine in a multi-stage sampling system. Widely used in industries such as power plants, coal mines, and steel mills to achieve fully automated random sampling of bulk materials in continuous transportation, eliminating human interference.

　　2、 Working sequence of belt middle sampling machine:

　　1. Interval timer starts the sampling machine motor;

　　2. The sampling head rotates through the material flow and scrapes the material, then throws it out;

　　3. After the proximity switch is triggered, the motor loses power and applies the brake. Stop the sampling hopper and keep it on the collection port while throwing the material into the collection port;

　　4. The timer enters the next cycle.

　　3、 Main structure and principle of belt middle sampling machine

　　The sampling device in the middle of the coal conveyor belt mainly consists of a brake motor reducer 1, a coupling 2, a sampling head 3, two proximity switches 4, a steel structure support cabinet frame 5, an outer cover 6, etc.

　　4、 Operating Procedures for Belt Middle Sampling Machine

　　Before the test drive, the bearings and gearbox should be checked for oil shortage. If there is a shortage of oil, it should be refilled in a timely manner

　　2. Check if the motor reducer, bearing seat, steel bracket, support seat, and any visible bolts are securely fastened.

　　3. Check if the power wiring is correct.

　　After checking everything is normal, first issue a test signal and then start the motor.

　　5. When the sampling head is running, pay attention to observing whether the operation is normal, whether the start and stop positions are appropriate, and whether there is any angle deviation. If any volume problems are found, stop the machine in time for handling.

　　6. When the sampling head is working, it is strictly prohibited for the staff to probe the head into the safety cover for inspection, cleaning, adjustment, and other work to avoid danger.

　　7. Do not move the sampling head to other positions by hand when it is charged, otherwise the sampling head will automatically reset and cause danger. 650mm belt middle sampling machine

　　Yucheng customized coal conveyor belt middle sampling device 650mm belt middle sampling machine, belt head sampler, coal conveyor belt sampling machine, conveyor belt middle sampling machine, with competitive prices. Durable and long-lasting.

AfterSalesService :

• Belt middle sampling machine