Yucheng Mining Electric Heater RB-2000/127A Details

Description :

　　Yucheng Mining Electric HeaterRB-2000/127（A）Details Introduction

　　RB-2000/127（A）Electric heaters, explosion-proof safety heaters, Shanxi mining heaters, direct sales of electric heaters, introduction of mining electric heaters

　　RB-2000/127 (A) Explosion proof and Safety increasing Electric Heater (formerly known as RB2000/127 (A) Explosion proof Electric Heater for Coal Mines) is suitable for use as heating equipment in fixed positions in underground coal mine chambers with methane or coal dust explosion hazards. RB-2000/127 (A) Explosion proof electric heater has explosion-proof performance compared to ordinary heaters. This is because of the special working environment, and explosion-proof products must be used in coal mines. Taian Yu provides you with safe explosion-proof electric heaters.

　　1RB-2000/127（A）Explosion proof and safety increasing type of electric heaterTechnical Specifications:

　　Size: 660 * 600 * 200

　　Weight: 160KG

　　Rated power: 2000W;

　　Rated voltage: 127V;

　　Temperature controller * high surface temperature: not exceeding (80 ± 5) ℃;

　　Technical parameters of temperature controller:

　　1. Model and specification: KSD307A-250V/45A;

　　2. Operating temperature range: 60 ℃~85 ℃ (± 5 ℃) (i.e. when the temperature of the thermostat housing is 85 ℃, the power is cut off, and when it is below 60 ℃, the power is automatically turned on);

　　3. Temperature controller contacts: double pole double throw, normally closed contacts, single contact capacity of 250V/22.5A, normal contact resistance not exceeding 50m;

　　4. Action life of temperature controller: 10000 times.

　　IIRB-2000/127（A）Explosion proof and safety increasing type of electric heaterModel representation:

　　IIIRB-2000/127（A）Explosion proof and safety increasing type of electric heaterAppearance and structure:

　　1. The surface of the product should be smooth and flat, without pores or sand holes.

　　2. Metal components must undergo rust and corrosion prevention treatments such as galvanizing.

　　3. Fasteners must have measures to prevent automatic loosening.

　　4. The shell should have a grounding bolt not less than M8, and there should be an internal grounding terminal inside the shell. There must be a clear grounding symbol near the grounding bolt.

　　5. A protective cover should be installed on the top of the heater to prevent the accumulation of coal dust.

　　6. The heater must not produce sparks, arcs, or dangerous temperatures under normal operating conditions.

　　Mining explosion-proof RB-2000/127 (A) electric heater is available for you, with price factoring. The company has won the trust and support of customers for a long time with the principles of good service, good quality, and small profits but high sales volume. Orders Are Welcome.

AfterSalesService :

• Mining electric heater