Manual belt nailing machine, sturdy and durable, pull rod belt nailing machine
Category:
metallurgy/Mining construction equipment/Other mining construction equipment
Model:
Belt nail buckle machine
Brand:
Tai'an Yucheng
Retail Price
120.00USD
重量
kg
- Product Description
-
Description :
Manual belt nailing machine is sturdy and durable Pull rod belt nail buckle machine
Manual belt nailing machine, pull rod belt nailing machine, belt nailing machine, strong belt nailing machine
Belt fastening machines are divided into manual fastening machines, electric fastening machines, and hammer fastening machines. Now let me introduce you to the manual nail buckle machine.
1、 Manual belt nailing machine usage method:
1. Place the wall with nails on the buckle upwards into the fastening machine and use a threading strip to position the buckle.
2. Insert the conveyor belt into the buckle without touching the end of the belt. The buckle should be about 5cm narrower than both ends of the conveyor belt.
3. Please use a specially designed iron hammer, and do not use a hammer weighing more than 6 pounds. First, lightly tap on nail A (the back position) to secure it, and then tap on nail B (the higher position) to fasten the nail into the conveyor belt with a small buckle before hitting it again. The nail will bend vigorously.
4. First order the middle button, then order the left (or left) button, and finally order from the right (or left) one by one.
2、 Characteristics of pull rod belt nail buckle machine
1. Strong adaptability to conveyor belt width, making customer management and use more convenient; Suitable for connecting deep groove conveyor belts with groove angles greater than 45 °.
2. A conveyor belt with a thickness of 20mm that can be bound, with a high tensile strength of ≤ 2500N/mm.
3. Adopting a staggered nail buckle arrangement to reduce the relative density of fasteners in the fastening area; After binding with a buckle, the buckle nail is embedded in the buckle body to improve the wear resistance of the buckle body and extend the service life of the joint.
4. Using a pull rod nail fastening machine for binding, with low labor intensity and high efficiency; Suitable for use on inclined belt conveyors.
The mining belt nailing machine, as the name suggests, is used to nail and fasten belts, that is, to apply patches. In order to reduce belt damage and extend the life of the belt, it plays an important repair role in the working process of the belt conveyor. Remember to find Tai'an Yucheng when choosing a belt fastener.
AfterSalesService :
Key words:- Manual belt nailing machine
