5x torque amplifier self-produced and sold, 8x torque amplifier

Description :

　　fiveSelf produced and self sold 8-fold torque amplifier

　　fiveDoubling torque amplifier, anchor rod torque amplifier, 8x amplifier, 5x amplifier, 8x torque amplifier

　　The 5-fold torque amplifier is driven by a combination of circular or planetary gears in different combinations to rotate and output power, with a torque amplification factor of 5 for each gear. In planetary gear systems, torque is input and output through gears. Three or four planetary gears are combined with gears to drive rotation. The circumferential gear inside the anchor rod torque amplifier housing is engaged with the surrounding internal planetary gear, but the rotation direction is opposite to that of the internal planetary gear. The reaction force arm can prevent the outer shell of the circular gear body from rotating, and cause the planetary gear to rotate around the gear to drive the driving head to rotate, thereby outputting torque. If there is no reactive force arm, torque cannot be output.

　　1、 Advantages of 5-fold torque amplifier

　　The 1.5-fold torque amplifier has been successfully developed using advanced domestic and foreign technologies to amplify the torque of anchor bolts. It has the characteristics of no need for a power source, easy operation, and high output torque.

　　2. The anchor rod nut installer consists of a handle (ratchet wrench), torque multiplier (planetary gear set), reaction arm claw (reaction foot), and extended sleeve. The operator only needs to apply a small force to obtain 5 or 10 times the output torque, thus easily completing the tightening work of the anchor rod nut.

　　The 3.5-fold torque amplifier is simple, practical, lightweight, and highly popular among workers

　　2、 Instructions for using a 5-fold torque amplifier with a hexagonal socket:

　　1. After drilling, remove the drill rod from the hexagonal sleeve of the drilling rig, and insert the outer hexagonal shaft of the anchor rod pre tension amplifier into the hexagonal sleeve of the drilling rig.

　　2. Place the amplifier reaction arm on the side of the drilling rig motor.

　　3. Insert the outer hexagonal shaft of the torque amplifier of the anchor drilling rig into the hexagonal sleeve of the drilling rig.

　　4. Insert the anchor bolt nut into the torque amplifier sleeve and start the drilling rig to install the anchor bolt (pre tightening force). Sometimes the torque of the anchor rod drilling rig needs to be amplified to improve the anchor rod support capacity, which cannot be achieved solely by manpower. In this case, a tool called the anchor rod torque amplifier is needed. You can choose how many multiples according to your specific needs. For example, by using a 5-fold anchor bolt torque amplifier, the torque of the anchor bolt drilling machine can be amplified by 5 times, and the pre tightening force of the anchor bolt can be increased by 5 times compared to using an anchor bolt drilling machine alone to install the anchor bolt. This better achieves the active support of the roof by the anchor bolt, reduces the sinking of the tunnel roof, and improves the effectiveness and initiative of anchor mesh support for the roof.

AfterSalesService :

• 5-fold torque amplifier