Tai'an Yucheng Mining Plug in Sliding Car Stopper Direct Sales Mine Car Stopper

Description :

　　Tai'an Yucheng Mining Plug in Sliding Car Stopper Direct Sales Mine car stopper

　　Mining plug-in sliding car stopper, Yucheng direct sales sliding car stopper, mining car stopper, plug-in sliding car stopper manufacturer

　　Working principle of mining plug-in sliding stopper:

　　The car stopper consists of a main frame and two pairs of boosters, with a total length of 2800mm.

　　1. Buffer rubber sheet.

　　2. The impact force of the vehicle is transmitted to the brake rail through the buffer rubber plate and the left and right support arms of the bracket.

　　3. Brake rail, spring seat Friction resistance is generated with the base rail to prevent the vehicle from sliding.

　　4. The elastic pressure device is composed of a plate spring, a spring seat, a wedge iron, and a bearing seat, installed in the brake rail of the main body frame and the brake rail of the booster. The function of the train stopper is to form a preload force when the stopper is static, increase the frictional resistance during braking, and continuously apply braking force during dynamic operation until stopping.

　　5. The support arm plate is made of a whole board, consisting of a support, front and rear crossbeams, and upper and lower diagonal beams tightly connected to form the main frame. The structure is reasonable, the overall strength is large, and it can withstand the impact of vehicles at high speeds.

　　6. The support arm plate is directly inserted into the brake rail by the lower hoof shaped block, with a simple structure and easy installation, maintenance, and reset.

　　7. After the main frame is subjected to force, it sequentially pushes the two pairs of brake rails in front of the stopper, the two pairs of brake rails behind, and the two pairs of boosters to slide. The frictional resistance gradually increases, which can prevent damage to the vehicle and the main frame, and also increase the cumulative resistance of the stopper. Has a large braking capacity.

　　Technical specifications of mining plug-in sliding stopper:

　　1. The total horizontal resistance of the derailleur shall not be less than 15 (T).

　　2. Allow vehicles to collide with the stopper at a speed of 20km/h.

　　3. The center of the buffer rubber plate is 850 ± 20mm higher than the basic rail surface.

　　Daily maintenance of mining plug-in sliding derailleur：

　　1. After the mining plug-in sliding stopper is hit, it should be restored to its original position in a timely manner. The wedge iron can be removed first, and the main frame and booster can be pushed back to their original position. Then, tighten it again according to the above method, lift the support arm under pressure, and place the spring seat, plate spring, and bearing seat on the basic rail below the hoof shaped quick stop in sequence.

　　2. Keep the mining plug-in sliding stopper in good working condition, and check it in sequence every month to confirm whether there is displacement, deformation, and loose screws. If there is any abnormality, it should be dealt with immediately. Use the brake rail to clamp the shoe block and also clamp the rail head of the basic rail, and then use three bolts to attach the brake rail. Note that the two outer bolts must pass through the support frame, and the seat should be located in the center of the pressure hole

　　The pressure buffering device consists of four main parts. It has the advantages of high braking capacity, good buffering effect, and high impact speed resistance.

　　Features of Mining Plug in Sliding Car Stopper Product

　　1. Super strong braking ability

　　The stopping ability of hydraulic buffer gear is the sum of the abilities of sliding (or fixed) gear and hydraulic buffer head assembly.

　　2. Protecting vehicles

　　At the same time as parking brake, the buffer head plays a protective role for the vehicle

　　3. No need for external energy, automatic braking, automatic reset.

　　Tai'an Yucheng has exquisite technology and excellent equipment inspection. We always adhere to the principles of quality first, integrity-based, technology, and cooperative development, never forgetting our original intention and constantly developing.

AfterSalesService :

• Mining plug-in sliding stopper