Mine car fixed brake automatic brake fixed frame brake
Category:
mechanical equipment/Fishery machinery and equipment/Mining vehicles and auxiliary equipment
Model:
fixed type
Brand:
Tai'an Yucheng
Retail Price
1,500.00USD
重量
kg
- Product Description
-
Description :
Fixed type automatic brake for mining cars Fixed frame type car stopper
Fixed car stopper for mining cars, fixed car stopper for trains, fixed frame car stopper,Characteristics of Fixed Car Stoppers
Parameters of fixed car stop for mining cars:
Allowable vehicle impact speed: According to user needs, 3 levels of 3, 5, and 7km/h can be provided.
Geometric shape and size of buffer head: Standard vehicles are flat, and subway, light rail, and other vehicles match the size and shape of the coupler provided by the user.
Height from the center of the buffer head to the rail surface: Standard rail vehicle: 850mm
Subway and light rail vehicles: 500mm, 660mm, 678mm, 720mm. Other vehicles are designed according to actual conditions based on user provided data.
Installation method of fixed car stopper for mining cars:
Place the left and right support arms on the basic rail and connect them to the support with the support pin.
Lift the support arm and place the spring seat, plate spring, and bearing seat on the basic rail below the hoof shaped fast track in sequence.
Use the brake rail to clamp the shoe block and also clamp the rail head of the basic rail, and then use three bolts to attach the brake rail. Note that the two outer bolts must pass through the support frame, and the seat should be located in the center of the pressure hole.
Connect the lower four feet of the two arms with the front and rear crossbeams, as well as the upper and lower diagonal beams, in an overlapping manner. The middle and four corners of the two diagonal beams are fastened with pin shafts. After completing the initial installation above, tighten the bolts of each part.
5. Apply pressure to each spring plate using a booster: Insert the U-shaped booster into the neutral positions on both sides of the seat, align the head of the booster screw installed on the center nut of the booster with the booster block, hook the bottom plate of the booster rail on both sides onto the base plate of the basic rail, tighten the nut, use a 1.5-meter-long iron rod to turn the booster screw, and drive the wedge iron between the seat and the plate spring, so that the gap between the plate spring and the spring seat is 0.6 ± 0.05 millimeters.
Install the signboard on the support.
After each installation, a position mark should be painted on the rail waist to facilitate daily inspection of whether the derailleur has been damaged.
Characteristics of Fixed Car Stopper for Mining Cars:
1. Protecting vehicles
At the same time as parking brake, the buffer head plays a protective role for the vehicle
2. No need for external energy, automatic braking, automatic reset.
3. Short occupied line, simple structure, low cost, and easy maintenance. It can be used in situations where the vehicle formation is small and the impact speed is not high.
Our company welcomes you to visit our company anytime and anywhere, and provides you with any convenient conditions. Through on-site inspection, it can be seen whether the manufacturer is present and whether their scale can meet your purchasing power for the product.
AfterSalesService :
Key words:- Fixed car stopper for mining cars
