Yucheng MGC3.3-9 Fixed Box type Mine Car with Coal Safety

Description :

　　YuchengMGC3.3-9Fixed box type mining car with coal safety

　　MGC3.3-9Fixed box type mining truck,three point threeTon fixed carriage mining car,nine hundredFixed gauge car type mining car

　　1、 MGC3.3-9 Fixed Box type Mine Car Parameter Description:

　　Model: MGC3.3-9

　　Capacity: 3.3 cubic meters

　　Nominal loading capacity: 3 tons

　　Loading capacity: 5.3 tons

　　Track gauge: 900mm

　　Dimensions: Length 3450mm, Width 1320mm, Height 1300mm

　　Wheelbase: 1100mm

　　Wheel diameter: 350mm

　　Traction height: 320mm

　　Rated traction force: 60KN

　　2、 Structural characteristics and working principle of MGC3.3-9 fixed box type mining car:

　　The main components include mining car pins, mining car rubber connectors, and mining car wheels.

　　MGC3.3-9 fixed box type mining cars generally need to be pulled by locomotives or winches, and the box is fixedly connected to the frame. The mining car needs to be overturned and unloaded by a dump truck. Its basic components are the carriage, frame, buffer, coupler, and walking mechanism. The frame is a metal structure that can withstand traction force, braking force, collision force between mining cars, and rail impact force. Buffer devices are installed at both ends of the frame to alleviate the impact force between the two cars. The coupler is a component that connects locomotives and mining cars, consisting of a pin chain and a revolving chain. The walking mechanism consists of two wheelsets consisting of four wheels and two axles.

　　3、 MGC3.3-9 Fixed Box type Mine Car

　　1. Regularly replace the lubricating grease of the wheel axle bearings. The bearings must be cleaned every 3 months and the No. 3 calcium based grease replaced. Add 65-80% of the oil storage cavity.

　　2. The mining car is regularly inspected every three months.

　　3. During the assembly of the wheel axle, it is not allowed to use a large hammer to strike it arbitrarily, and it should be pressed in mechanically without impact.

　　4. When the mining truck is not in use, it is usually stored outdoors. Regular inspections should be conducted on mining cars that have been stored for a long time.

　　5. If the main components such as wheels are damaged, in order not to affect the safety performance of the mining car, it is recommended to replace them with original factory parts.

　　6. The wheelsets of MGC3.3-9 fixed box type mining cars are strictly prohibited from being immersed in water for a long time.

　　7. The mining car carriage should be cleaned in a timely manner to prevent the carriage from condensing with coal and other loads.

　　Tai'an Yucheng conducts regular follow-up visits in terms of after-sales service. We have technical personnel who can provide you with more comprehensive technical guidance and provide one-stop service, allowing you to buy with confidence and use with comfort. What are you waiting for? Call my company quickly.

AfterSalesService :

• solid car