Yucheng produces MCC4-7 single-sided curved track side unloading mining car with curved track

Description :

　　Yucheng ProductionMCC4-7Single side curved track and side unloading mining car can be equipped with curved tracks

　　MCC4-7Single side curved track side unloading mine car, single side curved track side unloading mine car,MCC4-7Side dumping mining truck,fourTon side dump mining car

　　MCC4-7 single-sided curved track side unloading mining car features:

　　1. High efficiency, safe and reliable

　　2. The frame is a metal structure that can withstand traction force, automatic force, collision force between mining cars, and rail impact force

　　3. The structure is sturdy, the appearance is beautiful, the performance is reliable, the operation is flexible and smooth.

　　4. The mining car frame adopts a riveted welding structure, which reduces the impact of stress on the mining car and increases its service life.

　　5. It can run smoothly on both curves and straight roads.

　　Working principle of MCC4-7 single-sided curved track side unloading mining car

　　The MCC4-7 single-sided curved track side unloading mining car is mainly composed of wheel assembly, frame, pin shaft, carriage, unloading curved track, flip wheel, pin shaft, door hook, carriage door, supporting iron rod and other components. Transported by a rail pantograph, locomotive, or winch, it can only be unloaded towards the designated side on a curved track unloading platform that has been prepared for unloading. On one side of the carriage, it is connected to the frame with a shaft, and on the other side, there are unloading rollers installed on the door. When unloading, when the roller along the curved track slope transition device moves up the uphill section of the unloading curved track, causing the carriage to tilt and the movable side door to rotate around the pin axis and start unloading. When the roller runs downhill along the inclined unloading curved track, the carriage automatically descends and resets to the closed side door by its own weight. It should be noted that when the single-sided curved track unloading mining car is lifted from the bottom of the well to the unloading platform, the lifting winch should slow down to the slope unloading platform to ensure smooth unloading. Its advantage is that it has a larger capacity than dump trucks and fixed trucks, and can automatically and smoothly unload.

　　MCC4-7 single-sided curved track side unloading mine car is a type of mine car that uses the unloading wheel arm to automatically tilt, unload and reset the cargo box through the unloading curved track during the movement of the mine car. Efficient, safe and reliable. Unloading is carried out under the traction of a locomotive. When the unloading wheel climbs onto the curved track, the carriage flips and the doors automatically open to unload. After the carriage passes over the curved track, the carriage returns to its original position and the doors automatically lock.

　　Before using and installing the mining single-sided curved track side unloading mining car, attention should be paid to:

　　Before installing the MCC4-7 single-sided curved track side unloading mining car, Shouxian should check the installation position of the mining car, inspect the track laying, and adjust the parallelism and flatness of the two tracks if necessary. The top of the straight track should be at the same level, and the allowable error in the length direction should not exceed 1mm per meter or 3mm per 10m. The allowable error on the corresponding measuring points in the left and right directions should not exceed 2mm.

　　Tai'an Yucheng welcomes new and old customers to come and negotiate.

AfterSalesService :

• Single side curved track side unloading mining car