What equipment is good for fog paint in Heyuan automotive industry? Lianxiang mobile retractable paint booth is good

Description :

　　What equipment is good for fog paint in Heyuan automotive industry? Lianxiang mobile retractable paint booth is good

　　The structural principle of the Hefei high-temperature baking paint room design production safety folding editing section is that there is a limit switch block at both the starting and ending points of the telescopic moving front chamber. When the front chamber is fully opened, the limit switch contacts the block and the reducer automatically stops. If the limit switch fails, the second limit switch continues to function, thus providing dual protection; When the front chamber is closed, a dual limit switch is also used to ensure the safety of the retractable front chamber. Taking Beijing as an example: the limit for volatile organic compound emissions per unit coating area is 20g/㎡ for small cars (35 for truck driver's cab, 80 for passenger cars). -We also need to control the concentration limit of non total hydrocarbons 25mg/m3 (benzene 0.5; Benzene compound 10; Particulate matter 10). -It is also necessary to control the limit of volatile organic compound content in the coating. The primer should have a concentration of 50g/L (intermediate coat 100; Base paint 200; Cover light 480). The old line still has time for rectification, which is divided into two periods (the node is on August 31, 2017, and all will be implemented according to the new standards on September 1, 2017). The second period must be rectified, and the new line must comply with the standards, even if the old line has new paint colors, it must comply with the standards. 3. High work efficiency and guaranteed quality. Compared to manual spray painting and baking paint, the spray painting room is a mechanized "service", and the work efficiency is several times, even dozens of times higher. Moreover, during painting, the external air is filtered through a primary filter and sent to the roof by a fan, and then purified through a secondary filter at the top before entering the room. In short, a paint booth is generally used for spraying and baking paint, so the exact description of a paint booth should be "spray paint booth". It is widely used for surface painting and baking of workpieces in industries such as automobiles, machinery, hardware, furniture, fiberglass products, and chemical equipment. Cleanliness is an important indicator for measuring the quality of a baking room, which is ensured by an air purification system. A dust-free spray painting room (spray painting room) is an additional air purification system added to the enclosed room. The entire air filtration of the dust-free spray painting room (spray painting room) is Class II filtration, which combines initial air filtration (currently commonly below 300 mesh) with top high-efficiency filtration (currently commonly below 600 mesh). The top filter material is set at the bottom of the static pressure chamber and supported by a top mesh. The top mesh is made of stainless steel structure and is fixed around with fish tail screws and pressure plates. There is no overall rust and it is easy to replace the top cotton. Due to the rolling movement used in the telescopic spray painting, there may be slippage between the walking wheel and the track, causing the gearboxes on both sides to be out of sync. If the error is not eliminated in time, it can easily lead to derailment of the front compartment when the error accumulates to a certain extent.

AfterSalesService :

• Mechanical equipment painting