Wholesale of Plastic Grass Planting Grid for Firefighting Climbing Surface

Description :

　　Compared with the 50 type reinforced plastic grass planting grid, the height difference between the 70 type and 50 type products is 2cm. In special environments, the survival rate of seedlings is higher, which can reduce the rate of replanting seedlings in the later stage and save maintenance time. The enhanced grass planting grid of Plastic Branch is a new patented product with strong pressure resistance, impact resistance, aging resistance, wear resistance, corrosion resistance and flame retardancy, which is made of relatively new high-strength HDPE plastic as the main raw material. The test shows that the enhanced grass planting grid can carry more than 300 tons per square meter, and this structure is enough to carry the full weight of the fire truck, achieving the same function as the pavement paved with reinforced concrete. The plastic grass planting grid is lightweight, easy to install, and easy to plant grass. It has a green coverage rate of over 99% and can withstand a large drainage capacity, making it safe and reliable for both vehicles and pedestrians. This product is a better choice for car parking lots and fire exits, and has become a designated new product for promotion by the country.

　　Grass planting grid has a promising application prospect

　　With the acceleration of urbanization in China, there is an increase in high-rise buildings and building density, especially with the increase of urban vehicles, people are struggling with parking difficulties and often occupy public green space, resulting in a decreasing proportion of green space. People are naturally close to nature and crave green spaces for shade, lawns everywhere, and a comfortable living environment with green quality. Therefore, can we adopt a compromise or win-win approach to expand the use of green spaces for more purposes, rather than just for viewing and improving the environment, to increase green space area? Plastic grass planting grids on firefighting elevated surfaces are a good helper for greening.

　　The practical application of 5cm and 7cm grass planting grids is very good. In fact, its development and construction are very difficult, especially the basic part of construction, which is very important. For the requirements of the foundation, it is necessary to pay attention to filling and compacting, because the weight of the car is relatively heavy. If the foundation work is not done well in the early stage, it will affect the use of the 50 thick grass planting grid in the later stage. In order to promote better vegetation growth, many people often choose to sprinkle some organic fertilizer underneath, which is actually what is sprinkled on the grassroots. Then manually lay it on top, and because it has a regular shape, it can be arranged neatly in sequence. But if the foundation at this time is not so smooth, it will lead to gaps in the later construction, not only unsightly in appearance, but also damaging the laid products after multiple vehicle crushes, which is not cost-effective.

　　Common construction suggestions for wholesale of plastic grass planting grids on firefighting elevated surfaces

　　1. The foundation soil should be compacted in layers, with a density of at least 85%; For the soft plastic flow plastic silt layer, it is recommended to throw and fill with block stones and compact them until they are dense.

　　2. Install a 140 thick sand and gravel cushion layer. The specific method is to mix and mix 10% medium coarse sand, 60% 20-40 particle size crushed stone, and 30% cohesive soil, and flatten and compact them until they are dense.

　　3. Set a stable layer with a thickness of 60 (also serving as a planting layer). The method for stabilizing the layer is as follows: 25% crushed stone with a particle size of 10-30, 15% medium coarse and fine river sand, 60% cultivated soil mixed with an appropriate amount of organic fertilizer, evenly mixed, spread on the sand and gravel cushion layer, compact and compact, and can be used as the base layer for planting grass grids. 4. Sprinkle a small amount of organic fertilizer on the grassroots and manually lay grass grids. The external dimensions are designed based on the size module of the parking space, and generally do not need to be cut during paving; When there are special shape requirements for parking spaces or sewage manhole covers on parking spaces, they can be cut to meet the requirements of different shapes of parking spaces.

　　5. Sprinkle planting soil in the concave planting groove of KZ-H50 grass planting grid and evenly sweep it into the holes of the grass planting grid with a broom. The height of the soil layer should be 5-10mm lower than the plane of the grass planting grid.

　　6. Lay grass or sow grass seeds on the soil layer of the grass planting grid. When laying grass, it is necessary to compact the grass onto the planting soil. After watering and maintaining the grass, you can park it.

　　In the context of land scarcity, high land prices, and continuous compression of green land, reasonable roof greening is crucial for the construction of ecological cities. By developing and utilizing rooftop space, not only can the scale of greenery be expanded to improve urban climate and alleviate the urban heat island effect, but also the direct solar radiation heat acting on the roof surface can be reduced in summer, lowering indoor temperature; At the same time, it can also have a thermal insulation effect in winter.

　　The common specifications for wholesale of plastic grass grids for firefighting high-altitude surfaces include 4cm grass grids, 5cm grass grids, and 7cm grass grids. However, the actual height of the grass grid does not reach these specifications. The actual size of the 4cm grass grid is about 3.8cm, so it is not surprising that some people write it as 3.8cm grass grid. 3.8cm is not a case of manufacturers cutting corners, but rather molds produced by several large domestic enterprises. Because 3.8 is close to 4, it is customary to use 4cm grass grids, and similarly, 5cm grass grids and 7cm grass grids are the same. Furthermore, it should be noted that there is a certain amount of wear and tear on the grass grid. Our manufacturer usually informs customers in advance to avoid customers using it later and running out of square meters, questioning the manufacturer's insufficient supply, high transportation costs for restocking, and delays in construction progress. Specific losses can be consulted with the manufacturer. That's all for today's introduction.

　　The wholesale manufacturer of plastic grass planting grids for firefighting high-altitude surfaces has built a good reputation for Shandong Kuozhan grass planting grids with reasonable quality and prices!

AfterSalesService :

• Wholesale of Plastic Grass Planting Grid for Firefighting Climbing Surface