HM-1500 bridge deck waterproofing

Description :

　　Guangdong Shuanghong Waterproof and Thermal Insulation Engineering Co., Ltd

　　Manager: Dong Zuosheng Telephone:

　　double rainbow HM-1500Bridge deck waterproofing agent SH-160

　　Product Manual

　　1、 Product Introduction

　　This product is an inorganic solution containing high efficiency catalyst, carrier and other composite water agents. It has extremely strong permeability and can penetrate into the cement concrete (more than 3cm) to have a secondary chemical reaction with alkali substances, generate water insoluble gel, fill the small pores and gaps in the cement concrete, close the capillary channels, and form a complete, ideal and highly efficient waterproof substrate as a whole.

　　2、 Product Details

　　Product Name: Double Rainbow HM-1500 Bridge Waterproofing Agent

　　Product model SH-160

　　Product form: single component, colorless and transparent liquid slurry

　　Execute standard JC/T1018-2006

　　3、 Product advantages

　　1. It has unique waterproof performance and can penetrate into the interior of cement substrate, forming a comprehensive waterproof structural layer.

　　2. High temperature resistance, excellent aging resistance, and long material service life.

　　3. This product is made of non-toxic and environmentally friendly materials, with safe, simple, and pollution-free construction.

　　4. Used for waterproofing on waterproof surfaces or back surfaces, its waterproofing effect remains unchanged.

　　4、 Scope of application

　　1. It can adapt to various exterior wall substrates, such as plain water walls, lime, cement mortar plastering layers, and concrete surfaces, all of which have good waterproof, moisture-proof, mildew proof, pollution proof, and salt precipitation prevention functions.

　　2. Covering various decorative surfaces with coatings can significantly improve the waterproof, color retention, and anti pollution capabilities of the coating.

　　3. Used on the joint surface of tiles and mosaics, it can prevent the wall from absorbing water and the damage caused by frost due to water absorption, and prevent the peeling of tiles and mosaics. It can also prevent the salt precipitation of the wall from producing white flowers.

　　4. Used in ancient architecture, it can greatly improve its acid rain corrosion resistance, weathering resistance, waterproofing, and color retention performance.

　　5、 Construction technology

　　1. Base preparation

　　(1) The substrate must be free of visible water, flat, clean, and free of dust, grease, wax, mold release agents, and other debris;

　　(2) All small pores and sand holes can be sealed by adding a little water to the sealing king and mixing it into a wet ball shape, then smoothing it out;

　　2. Add cement mortar for use: The waterproofing agent is mixed with water in a ratio of 1:5-10, and then cement and sand are added to mix the mortar. Wet the base surface before use.

　　VI Precautions

　　1. Within 24 hours after construction, it shall not be affected by rainwater;

　　2. The suitable construction temperature is 5-40 ℃;

　　3. Do not mix this product with other materials.

　　7、 Reference dosage

　　 Spraying can cover an area of 4-5 square meters per kilogram. The actual dosage depends on the specific substrate conditions.

　　8、 Shelf life:

　　Under normal storage and transportation conditions, the shelf life is one year.

　　9、 Packaging specifications:

　　1. Product specifications

　　50L single component slurry

　　2. Packaging materials

　　The outer packaging is in plastic drums.

AfterSalesService :

• HM1500 bridge deck waterproofing