Specialized waterproofing membrane - SBS high-performance membrane,

Description :

　　Guangzhou Shuanghong Waterproof Building Materials Co., Ltd

　　Our company has long been dedicated to the research and production of waterproofing membrane series for municipal underground pipe galleries

　　(1) Self adhesive polymer renamed asphalt waterproofing membrane; (2) SBS modified asphalt waterproofing membrane; (3) APP modified asphalt waterproofing membrane; (4) Reactive adhesive polymer waterproofing membrane.

　　1、 Product Introduction

　　SBS elastomer modified asphalt waterproofing membrane is made of SBS (styrene butadiene styrene) thermoplastic elastomer modified asphalt as the dipping material, polyester felt, fiberglass felt, composite tire cloth as the base, and fine sand, mineral particles, PE film, aluminum film and other covering materials.

　　2、 Product Details

　　Product Name: Double Rainbow SBS Modified Asphalt Waterproof Membrane

　　Product Model SH-118

　　Product form: Black roll material

　　Implementing standard GB 18242-2008

　　3、 Product advantages

　　1. Can form a high-strength waterproof layer with strong resistance to pressure water;

　　2. High tensile strength, high elongation, strong adaptability to base shrinkage deformation and cracking;

　　3. Excellent high and low temperature resistance, suitable for both hot and cold regions. SBS is suitable for waterproofing buildings in cold regions with frequent structural deformation, while APP is suitable for waterproofing buildings in high temperature and areas with strong solar radiation;

　　4. Good puncture resistance, abrasion resistance, tear resistance, fatigue resistance, corrosion resistance, mold resistance, and weather resistance;

　　5. Good construction performance, hot melt bonding can be applied all year round, and the hot joints are reliable and durable.

　　4、 Scope of application

　　1. Waterproofing of various industrial and civil building roof projects;

　　2. Waterproofing and moisture-proof of underground engineering in industrial and civil buildings, as well as waterproofing of structures such as indoor swimming pools and fire water pools;

　　3. Waterproofing for municipal engineering projects such as subways, tunnels, concrete paved bridge decks, sewage treatment plants, and landfill sites;

　　4. Waterproof of water conservancy facilities such as canals and pools.

　　5、 Construction technology

　　1. Clean the base surface according to waterproof construction requirements.

　　2. Brushing the bottom layer: Mix the modified asphalt cold base oil evenly and apply it evenly on the base surface, without penetrating the bottom layer

　　Accumulation.

　　3. The sequence of laying rolls is as follows: first high span, then low span, at the same height, from far to near, on the same facade, from high to low

　　Start laying at this location.

　　4. Stretch line and trial laying: The roll material should be trial laid in place first, and then cut correctly according to the required shape before actual bonding can begin.

　　5. Large area laying of roll materials: There are two methods. In actual construction, construction personnel can determine the pasting method based on the site environment, temperature, sunlight and other conditions, but the basic methods are exhaust, compaction

　　The anti wrinkle requirements remain the same.

　　6. After exhausting and compacting the large area of the laid roll material, the roll material is overlapped and sealed, and then the end is fixed and sealed

　　6、 Precautions

　　1. Construction cannot be carried out on contaminated grassroots.

　　2. Roll packaging and isolation film can only be removed before laying and during the next construction process.

　　3. The materials should be stored in a dry and well ventilated warehouse, and should not be exposed to direct sunlight or rain.

　　4. The rolls should be laid flat and stacked at a height not exceeding three layers to avoid contact with benzene and substances that affect the chemical properties of asphalt rolls.

　　7、 Reference dosage

　　 The actual dosage depends on the specific substrate conditions.

　　8、 Shelf life:

　　Under normal storage and transportation conditions, the shelf life is one year.

　　9、 Packaging specifications:

　　1. Product specifications

　　2.0mm width 1m, with fiberglass tire, polyester tire, composite tire, etc

　　2.5mm width 1m, with fiberglass tire, polyester tire, composite tire, etc

　　3.0mm width 1m, with fiberglass tire, polyester tire, composite tire, etc

　　4.0mm width 1m, with fiberglass tire, polyester tire, composite tire, etc

　　2. Packaging materials

　　Roll material.

AfterSalesService :

• Discount for bulk purchases